Polycom RS-232 manual Muteo -- Mute One or More Outputs, Mute output, Unmute output a

S01MUTEI*2 Toggle mute status of all inputs.

S01MUTEI*? Query mute status of all inputs.

S01MUTEI*abcd , where each of the letters (a, b, etc.) is either 0 or 1 depending of the current status of the mute on the corresponding input. If this command was sent after the example above, then the status message would be S01MUTEI*0110 .

S01MUTEI*abcd where each of the letters (a, b, etc.) is either 0 or 1 depending of the current status of the mute on the corresponding input. If this command was sent after the example above, then the status message would be S01MUTEI*0110 .

8.108. MUTEO -- Mute One or More Outputs

This command sets or queries the mute status of the analog outputs (1, A, B, T) .

This command is a channel boolean command. See Section 6.3 and Section 6.1 for more information on this type of command.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example	Description
S01MUTEO11	Mute output 1 .
S01MUTEOA0	Unmute output A .
S01MUTEOT2
S01MUTEOB?	Query mute status of output B .

Status Message

S01MUTEO11

S01MUTEOA0

S01MUTEOTx , where x is either 0 or 1 depending on the current mute status of the output.

S01MUTEOBx , where x is either 0 or 1 depending on the current mute status of the output.

S01MUTEO*1 S01MUTEO*0

S01MUTEO*1001

S01MUTEO*2

Mute all outputs (1, A, B, T) .

Unmute all outputs (1, A, B, T) .

Mute outputs 1 and T and unmute outputs A and B.

Toggle mute status of all outputs.

S01MUTEO*1111

S01MUTEO*0000

S01MUTEO*1001

S01MUTEO*abcd where each of the letters (a, b, etc.) is either 0 or 1 depending of the current status of the mute on the corresponding output. If this command was sent after the example above, then the status message would be S01MUTEO*0110 .