Polycom RS-232 manual Mutegil -- Set Mute Status of Line Inputs as a Group

Set all crosspoint mutes for input channel 1. Mute the paths from input 1

S01MMUTE1,*,0110100000 to outputs A, B, and P and unmute the paths from input 1 to outputs 1, T, R1, and W-Z.

Unmute all

S01MMUTEA,*,0 crosspoints for input channel A .

Toggle all crosspoint

S01MMUTEA,*,2 mutes for input channel A .

Query all crosspoint

S01MMUTEA,*,? mutes for input channel A .

S01MMUTE1,*,0110100000

S01MMUTEA,*,0000000000

S01MMUTEA,*,abcdefghij , where the value

of each of letters (a, b, etc.) is either 0 or 1 depending on the current state of each of the crosspoint mutes. If this command was issued after the example above, then the status message would be

S01MMUTEA,*,0000000000

S01MMUTEA,*,abcdefghij , where the value

of each of letters (a, b, etc.) is either 0 or 1 depending on the current state of each of the crosspoint mutes. If this command was issued after the example above, then the status message would be

S01MMUTEA,*,0000000000

8.106. MUTEGIL -- Set Mute Status of Line Inputs as a Group

This command sets the mute status of all the line inputs simultaneously. This is different from using a wildcard, * with the MUTEI command because that command sets all the mic and line inputs together,

while the MUTEGIL sets only the line inputs.

This command will generate acknowledgements from each of the line inputs separately.

This command is a boolean command. See Section 6.1 for more information on this type of command.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example DescriptionStatus Message

S01MUTEGIL1 Mute all line inputs.	S01MUTEIA1
	S01MUTEIB1