Manuals / Polycom / Marine Equipment / Waterskis

Polycom RS-232 manual Toner -- Enable or Disable Ring Tones

Models: RS-232

1 123

Download 123 pages 19.08 Kb

Page 121

Toggle enabled status of entry and exit S01TONEE2 tones.

S01TONEE? Query enabled state of entry and exit tones.

S01TONEEx , where x is 0 or 1

depending on the current enabled state of entry and exit tones.

S01TONEEx , where x is 0 or 1

depending on the current enabled state of entry and exit tones.

8.153. TONER -- Enable or Disable Ring Tones

This command sets or queries the enabled status of the ring tone feature. If ring tones are enabled, a ring tone is played whenever there is an incoming ring signal on the connected phone line.

This command is a boolean command. See Section 6.1 for more information on this type of command.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example	Description	Status Message
S01TONER1	Enable auto ring tones.	S01TONER1
S01TONER0	Disable ring tones.	S01TONER0

S01TONER2 Toggle enabled status of ring tones. S01TONERx , where x is 0 or 1 depending on the current enabled state of ring tones.

S01TONER? Query enabled state of ring tones. S01TONERx , where x is 0 or 1 depending on the current enabled state of ring tones.

8.154. VTXMODI -- Enable VTX Mode on Specified Inputs

Vortex devices can be connected to a Polycom VTX 1000 in order to use the wideband capabilities of that device. When connecting to a VTX 1000, special proccessing is done on the Vortex in order to guarantee compatibility with the VTX 1000. This command enables processing for the VTX 1000 on the specified line input or inputs. Note that VTX 1000 mode can only be enabled on the line inputs (A- B).

This command is a channel boolean command. See Section 6.3 and Section 6.1 for more information on this type of command.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example	Description	Status Message
S01VTXMODIA1	Enable VTX mode on input A.	S01VTXMODIA1

Image 121

Polycom RS-232 manual Toner -- Enable or Disable Ring Tones, Vtxmodi -- Enable VTX Mode on Specified Inputs

Contents

Vortex EF2211 Programming Guide Installed Voice Business GroupVortex EF2211 Programming Guide Page Page Page Initialization IntroductionWildcard Characters Using AcknowledgementsDevice Type Macros and PresetsDescription Number of Characters Command Data Command NameCommand Terminator Device IDExamples Command EffectsRequests Pong response from all linked Vortex devices Integer Commands Boolean CommandsChannel Commands S04MUTEI11 , while S04MUTEI*? might return S04MUTEI*100 Matrix Commands EF2280 No Yes EF2241 Yes EF2211 Yes EF2210 No EF2201 Yes BussesSubmatrix Inputs XB0-XB7 with one invalid Outputs XM0-XM2 Inputs WB0-WB7 with one invalid Outputs WM0-WM2Inputs YB0-YB7 with one invalid Outputs YM0-YM2 Miscellaneous Commands Command ListStorage Description CommandSet Automixer Reference Bias for the Specified Automixer Enable or Disable Stereo AGC Linking on Inputs a and B Add Command to Current Macro AA -- Enable or Disable Auto Answer Mode Command ReferenceAEC -- Enable or Disable Acoustic Echo Cancellation Ackmod -- Enable or Disable Acknowledgment ModeExample Description Status Message Example DescriptionDisable AEC on input channel Enable AEC on input channelCurrent state of the AEC on input channel S01AEC1? Query AEC state on input channelDisable AGC on input channel T Enable AGC on input channelAgcmax -- Set Maximum Allowed Mic/Line Input AGC Gain Channels 1 and T the telephone inputAgcrate -- Set Ramp Rate of Mic/Line Input AGC Agcmin -- Set Minimum Allowed Mic/Line Input AGC GainExample Ahld -- Enable or Disable Loop Drop Based Auto Hangup Ahcp -- Enable or Disable Call Progress Based Auto HangupEnable call progress based auto hangup mode S01AHCP? Query auto hangup modeAmasgn -- Assign Inputs to an Automixer Enable loop drop based auto hangup modeExample Ambusid -- Set Automixer Groupings for EF BusAmchair -- Enable Chairman Mode for Specified Automixer Amdecay -- Set Decay Time for Automixers Amchnum -- Set Chairman MicSet automixer decay time to Configure microphone input 1 for S01AMGATEC10 normal gating Amgatec -- Set Automixer Gating Control ModeAmgater -- Set Automixer Gate Ratio Increase automixer decay timeExample Description Status Message Amgatet -- Set Automixer Gate ThresholdAmhold -- Set Automixer Hold Time Example Amlmm -- Set Last Mic On Mode for Specified AutomixerQuery the current manual last mic on Amnom -- Set Local Maximum Number of Open MicsAmnomat -- Select NOM Attenuation on Each Output For AutomixerAmoffat -- Set Off Attenuation for the Specified Automixer Amprior -- Set Gating Priority for the Specified Mic Automixer Disable automixer reference mode forDepending on the current setting Blauto -- Enable Automatic Bldata MessagesBaud -- Set Baud Rate for RS-232 Port Panel RS-232 portMeaning Bldata -- Request Level InformationByte Value AEC State Value Byte Value Translate to AEC statesBlinfo -- Select Information to be Reported Where the ii bytes are the signal levels for inputs A-BBusref -- Set Which AEC Reference is Placed on EF Broada -- Broadcast Commands to Other Connected DevicesVoice Business Group in Atlanta PortCgate -- Query Camera Gating Status Information Cgateen -- Enable Automatic Camera Gating MessagesS01CGATET1000 Cgatet -- Set Camera Gating Hold TimeCommand Value Country Delayo -- Set Output DelayCountry -- Specify Country Definitions for Phone Interface S01DELAYOB3200 Delayoe -- Enable Output DelayQuery enabled status Dspauto -- Enable Automatic Dspload Status MessagesEnable automatic Dspload messages. S01DSPAUTO1 Dial -- Send Dtmf Digits to Phone InterfaceError Number Description Error -- Enable or Disable Error MessagesDspload -- Query Percentage of Variable DSP Resources Used Page S01ERROR0 Disable error messages mode. S01ERROR0 Enable error messagesS01ERROR2 Toggle error message mode Current state of error modeSet fader gain on input a to Faderi -- Set Input Gain FaderCommand Value Description Flow -- Set Flow Control Mode for RS-232 PortFlash -- Execute Hook Flash Status Message Fplock -- Lock/Unlock Front PanelGaina -- Set Phone Input Gain Fppswd -- Change Front Panel PasswordGaind -- Set Gain of Incoming Dtmf Tones Gaindt -- Set Dial Tone Gain Gaindit -- Set Gain of Incoming Dtmf TonesSet incoming Dtmf gain to 6 dB Query incoming Dtmf gainS01GAINDT6 Set dial tone gain to 6 dB Gaingil -- Set Gain of Line Inputs as a GroupS01GAINDT? Query dial tone gain Set gain of all line inputs to 7 dBGaini -- Set Input Gain Input Channel MIC Setting Gaini Setting dBSet gain on Gaino -- Set Output GainQuery gain Gainsit -- Set From Phone User Tone Gain Gainp -- Set Phone Output GainGate -- Query Gating Status Information Gainsot -- Set To Phone User Tone GainGmuteo -- Mute All Outputs Gateen -- Enable Automatic Gating MessagesLabel -- Set or Query one of the Device Labels ID -- Set Device IDLabel for the signal generator Lagc -- Enable or Disable Line Input Automatic Gain ControlLabel Specifier Description Label for the device itselfDisable AGC on input channel a Enable AGC on input channel BQuery AGC state on input channel a Disable stereo AGC linking on Enable stereo AGC linking onLagcmax -- Set Maximum Allowed Line Input AGC Gain Lagcmin -- Set Minimum Allowed Line Input AGC GainLagcrate -- Set Ramp Rate of Line Input AGC LEC -- Enable or Disable LECS01LEC0 Disable LEC S01LEC1 Enable LECLI -- Query State of Logic Inputs Query current state S01LI*? of logic inputs LIA -- Assign Action for when Logic Input is ActivatedAssign the command LID -- Assign Action for when Logic Input is DeactivatedLIH -- Assign Action for when Logic Input is Held To increase by 3 dB each time the command is executed Lien -- Enable Automatic Logic Input Status MessagesEnable automatic logic input status messages. S01LIEN1 LIG -- Configure Logic Input Pins Into a GroupDisable automatic logic input status messages. S01LIEN0 LIM -- Mask Logic Input Pins LIK -- Delete One or All Logic Input Pin CommandsLID, and LIH will not be executed LIP -- Set Polarity for Logic Inputs LIN -- Assign Command to Logic Input GroupQuery current S01LIM?logic input mask LOA -- Define Behavior for Logic Output Activated LO -- Query or Set Status of Logic Output PinsSet logic inputs 1- 20 to normal active low Active highState Our example, we issue the following commandsDepending on the current setting of Loen Loen -- Enable Automatic Logic Output Status MessagesLOD -- Define Behavior for Logic Output Deactivated Status Delete conditions for activation of logic outputLOM -- Mask Logic Output Pins LOK -- Delete One or All Logic Output Pin CommandsS01LOD5, except that this command is more efficient LOP -- Set Polarity for Logic Outputs Macroa -- Add Command to Current MacroQuery current S01LOM?logic output mask Macrok -- Delete One or All Macros Delete all the commands associated with macro numberMacroq -- Execute Macro Quietly Macrol -- List All Commmands in a MacroMacros -- Start a New Macro Macrox -- Execute Macro Macrow -- Write Macro to Non-Volatile MemoryExample Mgain -- Set Crosspoint Gains in Main Matrix or SubmatrixMgate -- Select Gated or Ungated Microphone Signal in Matrix Toggle the gated status MIC -- Enable Microphone Gain Stage on InputQuery enabled status of microphone gain Mini -- Enable Modem Initialization StringOn the current enabled state This can be set via the following commandSet modem initialization Mmute -- Mute Crosspoint in Main Matrix or SubmatrixQuery current modem String is the current modem Initialization string Sent after the above example, thenS01MUTEGIL1 Mute all line inputs Mutegil -- Set Mute Status of Line Inputs as a GroupS01MUTEGIL2 Toggle mute status of all line inputs Mutei -- Mute One or More InputsMute output Muteo -- Mute One or More OutputsUnmute output a NCL -- Set Noise Cancellation Attenuation NC -- Enable Noise CancellationNvlock -- Lock/Unlock Non-Volatile Memory Nvinit -- Reinitialize Non-Volatile MemoryQuery the NC attenuation level on input S01NCL1? channel Set non-volatile memory password to lemur Nvpswd -- Change Non-Volatile Memory PasswordQuery the locked status of the non-volatile memory Units Description Value RangeFilter Type Bandwidth Frequency Gain Slope Example Description S01PEQIAB,1,? S01PEQIE1,2,1 S01PEQIFB,1,? Filter Type Frequency Bandwidth 100th octave Description Value Range UnitsFilter Type Bandwidth Frequency Gain S01PEQOAB,1,? S01PEQOB1,2,40 S01PEQOF1,2,1250 Octave Parametric Filter TypePhone -- Take Phone On-Hook or Off-Hook Phantom -- Enable Phantom Power on InputPing -- See Which Devices Are Present Presetk -- Delete One or All PresetsConnected devices Presetp -- Set Which Preset Will Be Activated At Power-Up Presetl -- List All Commmands in a PresetPresetq -- Execute a Preset Quietly Presetx -- Execute a Preset Presetw -- Save a PresetSave the current device settings as preset Refasgn -- Assign AEC Reference to Input Channel Redial -- Redial the Last Dialed Phone NumberRefgain -- Set Reference Output Gain Ring -- Enable or Disable Ring Messages Sgmute -- Mute Signal Generator Sggain -- Set Gain of Signal GeneratorS01SGGAIN6 Set signal generator gain to 6 dB S01SGGAIN? Query signal generator gainSoundl -- Play Sound Locally Sgtype -- Set Type of Signal Produced by Signal GeneratorSound Number Soundp -- Play Sound to Phone Ssdelay -- Set Delay Between Screen Saver ScreensEnable screen saver Ssen -- Enable or Disable Screen SaverDisable screen saver Ssstart -- Set Idle Time Required for Screen Saver to StartS01SSSTART2000 Sstext -- Set Text to be Displayed by Screen SaverTonee -- Enable or Disable Entry and Exit Tones Swreset -- Perform Soft Reset of SystemEnable auto entry and exit tones Disable entry and exit tonesVtxmodi -- Enable VTX Mode on Specified Inputs Toner -- Enable or Disable Ring TonesExample Vtxmodo -- Enable VTX Mode on Specified InputsS01VTXMODO*111 S01VTXMODO*000 S01VTXMODO*100