Manuals / Polycom / Marine Equipment / Waterskis

Polycom RS-232 manual Enable AEC on input channel, Disable AEC on input channel

Models: RS-232

1 123

Download 123 pages 19.08 Kb

Page 23

This command is saved to non-volatile memory only as part of a preset. The state of this command will be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example	Description	Status Message
S01AEC11	Enable AEC on input channel 1.	S01AEC11
S01AEC10	Disable AEC on input channel 1.	S01AEC10
S01AEC12 Toggle AEC state on input channel 1.		S01AEC1x , where x is 0 or 1 depending on the
		current state of the AEC on input channel 1.
S01AEC1? Query AEC state on input channel 1.		S01AEC1x , where x is 0 or 1 depending on the
		current state of the AEC on input channel 1.

8.4.AECMODE -- Set Amount of Double Talk Suppression used in the AEC.

This command sets the amount of double talk suppression used in the AEC on input channel 1. The values correspond to the following settings.

●1 = No Suppression

●2 = Light Suppression

●3 = Heavy Suppression

●4 = Half Duplex

This command is a channel integer command. See Section 6.3 and Section 6.2 for more information

on this type of command. The minimum and maximum values for this command are 1 and 4, respectively.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example Description

Set AEC on input channel 1 to Heavy S01AECMODE13 Suppression.

Query AEC suppression level on

S01AECMODE1? input channel 1.

Status Message

S01AECMODE13

S01AECMODE1x , where x is 1, 2, 3, or 4

depending on the current setting of the AEC suppression level on input channel 1.

8.5.AGC -- Enable or Disable Mic/Line Input Automatic Gain Control

This command sets or queries the status of the Automatic Gain Control (AGC) algorithm on input

Image 23

Polycom RS-232 manual Enable AEC on input channel, Disable AEC on input channel, Current state of the AEC on input channel

Contents

Vortex EF2211 Programming Guide Installed Voice Business GroupVortex EF2211 Programming Guide Page Page Page Initialization IntroductionWildcard Characters Using AcknowledgementsDescription Number of Characters Macros and PresetsDevice Type Device ID Command NameCommand Data Command TerminatorRequests Pong response from all linked Vortex devices Command EffectsExamples Channel Commands Boolean CommandsInteger Commands S04MUTEI11 , while S04MUTEI*? might return S04MUTEI*100 Matrix Commands Submatrix BussesEF2280 No Yes EF2241 Yes EF2211 Yes EF2210 No EF2201 Yes Inputs YB0-YB7 with one invalid Outputs YM0-YM2 Inputs WB0-WB7 with one invalid Outputs WM0-WM2Inputs XB0-XB7 with one invalid Outputs XM0-XM2 Miscellaneous Commands Command ListStorage Description CommandSet Automixer Reference Bias for the Specified Automixer Enable or Disable Stereo AGC Linking on Inputs a and B Add Command to Current Macro AA -- Enable or Disable Auto Answer Mode Command ReferenceExample Description Ackmod -- Enable or Disable Acknowledgment ModeAEC -- Enable or Disable Acoustic Echo Cancellation Example Description Status MessageS01AEC1? Query AEC state on input channel Enable AEC on input channelDisable AEC on input channel Current state of the AEC on input channelChannels 1 and T the telephone input Enable AGC on input channelDisable AGC on input channel T Agcmax -- Set Maximum Allowed Mic/Line Input AGC GainExample Agcmin -- Set Minimum Allowed Mic/Line Input AGC GainAgcrate -- Set Ramp Rate of Mic/Line Input AGC S01AHCP? Query auto hangup mode Ahcp -- Enable or Disable Call Progress Based Auto HangupAhld -- Enable or Disable Loop Drop Based Auto Hangup Enable call progress based auto hangup modeAmasgn -- Assign Inputs to an Automixer Enable loop drop based auto hangup modeExample Ambusid -- Set Automixer Groupings for EF BusAmchair -- Enable Chairman Mode for Specified Automixer Set automixer decay time to Amchnum -- Set Chairman MicAmdecay -- Set Decay Time for Automixers Increase automixer decay time Amgatec -- Set Automixer Gating Control ModeConfigure microphone input 1 for S01AMGATEC10 normal gating Amgater -- Set Automixer Gate RatioExample Description Status Message Amgatet -- Set Automixer Gate ThresholdAmhold -- Set Automixer Hold Time Example Amlmm -- Set Last Mic On Mode for Specified AutomixerQuery the current manual last mic on Amnom -- Set Local Maximum Number of Open MicsAmnomat -- Select NOM Attenuation on Each Output For AutomixerAmoffat -- Set Off Attenuation for the Specified Automixer Amprior -- Set Gating Priority for the Specified Mic Automixer Disable automixer reference mode forPanel RS-232 port Blauto -- Enable Automatic Bldata MessagesDepending on the current setting Baud -- Set Baud Rate for RS-232 PortMeaning Bldata -- Request Level InformationByte Value AEC State Value Byte Value Translate to AEC statesBlinfo -- Select Information to be Reported Where the ii bytes are the signal levels for inputs A-BPort Broada -- Broadcast Commands to Other Connected DevicesBusref -- Set Which AEC Reference is Placed on EF Voice Business Group in AtlantaCgate -- Query Camera Gating Status Information Cgateen -- Enable Automatic Camera Gating MessagesS01CGATET1000 Cgatet -- Set Camera Gating Hold TimeCountry -- Specify Country Definitions for Phone Interface Delayo -- Set Output DelayCommand Value Country S01DELAYOB3200 Delayoe -- Enable Output DelayDial -- Send Dtmf Digits to Phone Interface Dspauto -- Enable Automatic Dspload Status MessagesQuery enabled status Enable automatic Dspload messages. S01DSPAUTO1Dspload -- Query Percentage of Variable DSP Resources Used Error -- Enable or Disable Error MessagesError Number Description Page Current state of error mode Enable error messagesS01ERROR0 Disable error messages mode. S01ERROR0 S01ERROR2 Toggle error message modeSet fader gain on input a to Faderi -- Set Input Gain FaderFlash -- Execute Hook Flash Flow -- Set Flow Control Mode for RS-232 PortCommand Value Description Status Message Fplock -- Lock/Unlock Front PanelGaind -- Set Gain of Incoming Dtmf Tones Fppswd -- Change Front Panel PasswordGaina -- Set Phone Input Gain Query incoming Dtmf gain Gaindit -- Set Gain of Incoming Dtmf TonesGaindt -- Set Dial Tone Gain Set incoming Dtmf gain to 6 dBSet gain of all line inputs to 7 dB Gaingil -- Set Gain of Line Inputs as a GroupS01GAINDT6 Set dial tone gain to 6 dB S01GAINDT? Query dial tone gainGaini -- Set Input Gain Input Channel MIC Setting Gaini Setting dBQuery gain Gaino -- Set Output GainSet gain on Gainsit -- Set From Phone User Tone Gain Gainp -- Set Phone Output GainGate -- Query Gating Status Information Gainsot -- Set To Phone User Tone GainGmuteo -- Mute All Outputs Gateen -- Enable Automatic Gating MessagesLabel -- Set or Query one of the Device Labels ID -- Set Device IDLabel for the device itself Lagc -- Enable or Disable Line Input Automatic Gain ControlLabel for the signal generator Label Specifier DescriptionQuery AGC state on input channel a Enable AGC on input channel BDisable AGC on input channel a Lagcmin -- Set Minimum Allowed Line Input AGC Gain Enable stereo AGC linking onDisable stereo AGC linking on Lagcmax -- Set Maximum Allowed Line Input AGC GainLagcrate -- Set Ramp Rate of Line Input AGC LEC -- Enable or Disable LECLI -- Query State of Logic Inputs S01LEC1 Enable LECS01LEC0 Disable LEC Query current state S01LI*? of logic inputs LIA -- Assign Action for when Logic Input is ActivatedAssign the command LID -- Assign Action for when Logic Input is DeactivatedLIH -- Assign Action for when Logic Input is Held To increase by 3 dB each time the command is executed Lien -- Enable Automatic Logic Input Status MessagesDisable automatic logic input status messages. S01LIEN0 LIG -- Configure Logic Input Pins Into a GroupEnable automatic logic input status messages. S01LIEN1 LID, and LIH will not be executed LIK -- Delete One or All Logic Input Pin CommandsLIM -- Mask Logic Input Pins Query current S01LIM?logic input mask LIN -- Assign Command to Logic Input GroupLIP -- Set Polarity for Logic Inputs Active high LO -- Query or Set Status of Logic Output PinsLOA -- Define Behavior for Logic Output Activated Set logic inputs 1- 20 to normal active lowState Our example, we issue the following commandsDelete conditions for activation of logic output Loen -- Enable Automatic Logic Output Status MessagesDepending on the current setting of Loen LOD -- Define Behavior for Logic Output Deactivated StatusS01LOD5, except that this command is more efficient LOK -- Delete One or All Logic Output Pin CommandsLOM -- Mask Logic Output Pins Query current S01LOM?logic output mask Macroa -- Add Command to Current MacroLOP -- Set Polarity for Logic Outputs Macrok -- Delete One or All Macros Delete all the commands associated with macro numberMacros -- Start a New Macro Macrol -- List All Commmands in a MacroMacroq -- Execute Macro Quietly Macrox -- Execute Macro Macrow -- Write Macro to Non-Volatile MemoryExample Mgain -- Set Crosspoint Gains in Main Matrix or SubmatrixMgate -- Select Gated or Ungated Microphone Signal in Matrix Toggle the gated status MIC -- Enable Microphone Gain Stage on InputThis can be set via the following command Mini -- Enable Modem Initialization StringQuery enabled status of microphone gain On the current enabled stateInitialization string Sent after the above example, then Mmute -- Mute Crosspoint in Main Matrix or SubmatrixSet modem initialization Query current modem String is the current modemS01MUTEGIL1 Mute all line inputs Mutegil -- Set Mute Status of Line Inputs as a GroupS01MUTEGIL2 Toggle mute status of all line inputs Mutei -- Mute One or More InputsUnmute output a Muteo -- Mute One or More OutputsMute output NCL -- Set Noise Cancellation Attenuation NC -- Enable Noise CancellationQuery the NC attenuation level on input S01NCL1? channel Nvinit -- Reinitialize Non-Volatile MemoryNvlock -- Lock/Unlock Non-Volatile Memory Query the locked status of the non-volatile memory Nvpswd -- Change Non-Volatile Memory PasswordSet non-volatile memory password to lemur Filter Type Bandwidth Frequency Gain Slope Description Value RangeUnits Example Description S01PEQIAB,1,? S01PEQIE1,2,1 S01PEQIFB,1,? Filter Type Frequency Bandwidth 100th octave Description Value Range UnitsFilter Type Bandwidth Frequency Gain S01PEQOAB,1,? S01PEQOB1,2,40 S01PEQOF1,2,1250 Octave Parametric Filter TypePhone -- Take Phone On-Hook or Off-Hook Phantom -- Enable Phantom Power on InputConnected devices Presetk -- Delete One or All PresetsPing -- See Which Devices Are Present Presetq -- Execute a Preset Quietly Presetl -- List All Commmands in a PresetPresetp -- Set Which Preset Will Be Activated At Power-Up Save the current device settings as preset Presetw -- Save a PresetPresetx -- Execute a Preset Refgain -- Set Reference Output Gain Redial -- Redial the Last Dialed Phone NumberRefasgn -- Assign AEC Reference to Input Channel Ring -- Enable or Disable Ring Messages S01SGGAIN? Query signal generator gain Sggain -- Set Gain of Signal GeneratorSgmute -- Mute Signal Generator S01SGGAIN6 Set signal generator gain to 6 dBSound Number Sgtype -- Set Type of Signal Produced by Signal GeneratorSoundl -- Play Sound Locally Soundp -- Play Sound to Phone Ssdelay -- Set Delay Between Screen Saver ScreensSsstart -- Set Idle Time Required for Screen Saver to Start Ssen -- Enable or Disable Screen SaverEnable screen saver Disable screen saverS01SSSTART2000 Sstext -- Set Text to be Displayed by Screen SaverDisable entry and exit tones Swreset -- Perform Soft Reset of SystemTonee -- Enable or Disable Entry and Exit Tones Enable auto entry and exit tonesVtxmodi -- Enable VTX Mode on Specified Inputs Toner -- Enable or Disable Ring TonesExample Vtxmodo -- Enable VTX Mode on Specified InputsS01VTXMODO*111 S01VTXMODO*000 S01VTXMODO*100