Reset Functions
This section allows you to reset specific parts of the device. Currently this involves the video engine and the DKVM-IP1 switch itself. Resetting the card itself is mainly needed to activate a newly updated firmware. It will close all current connections to the administration console and to the Remote Console. The whole process will take about half a minute. Resetting sub devices (e.g. video engine) will take some seconds only and do not result in closing connections.
6.6.2Even log
Figure 6-33. Event Log List
Figure 6-33 displays the log list including the events that are logged by the DKVM-IP1 switch.
6.6.3Update Firmware
Figure 6-34. Update Firmware
The DKVM-IP1 switch is a complete standalone computer. The software it runs is called the firmware. The firmware of the DKVM-IP1 switch can be updated remotely in order to install new functionality or special features.
