D-Link DKVM-IP1 manual Local Keyboard, Hotkeys, Encoding

Page 29

Figure 5-13. Soft Keyboard Mapping

•Local Keyboard

Used to change the language mapping of your browser machine running the Remote Console Applet. Normally, the applet determines the correct value automatically. However, depending on your particular JVM and your browser settings this is not always possible. A typical example is a German localized system that uses an US-English keyboard mapping. In this case you have to change the Local Keyboard setting to the right language, manually.

•Hotkeys

Opens a list of hotkeys defined before. Choose one entry, the command will be sent to the host system.

A confirmation dialog can be added that will be displayed before sending the selected command to the remote host. Select “OK” to perform the command on the remote host.

Figure 5-14. Remote Console Confirmation Dialog

Encoding

26

Image 29

Contents Link DKVM-IP1 Port KVM Switch Over IP Manual Contents Menu Options Video modes InstallationDKVM-IP1 switch hardware installation Web interface Initial IP configurationTop part of the Remote Console Remote ConsoleWhen the server is dead When the server is up and runningPackage contents FeaturesDKVM-IP1 1port KVM Switch Over IP Technical specifications Model NoSystem requirement DescriptionUSB 2.0 Cable Cable diagrams PS/2 CableVGA Cable Step Connecting DKVM-IP1 switch to the host systemOperation Overview Connect the monitor to the DKVM-IP1 switch console side Ethernet connection OptionPage DKVM-IP1 switch Setup Tool Initial ConfigurationInitial configuration via Dhcp server Initial configuration via serial console AuthenticationKeyboard, Mouse and Video configuration IP auto configurationDKVM-IP1 switch keyboard settings IP addressHost system mouse settings Remote Mouse SettingsAuto mouse speed and mouse synchronization Fast SyncSingle and Double Mouse Mode Windows XP Mouse SettingsRecommended Mouse Settings Special Mouse DriverTelnet PrerequisitesInternet Explorer displaying the encryption key length Login into the DKVM-IP1 switch and logoutMain NavigationRemote Console General description Logout from the DKVM-IP1 switchRemote Console Control Bar Main WindowRemote Console Options Menu Exclusive AccessLocal Cursor ScalingMouse Handling Remote Console Options MenuCursor Video Settings12. Soft Keyboard Soft KeyboardEncoding Local KeyboardHotkeys 15. Encoding Remote Console Status Line17. Status line transfer rate Telnet Console Remote KVM ConsoleCls HelpQuit VersionUse Image on Windows Share Samba Upload a Floppy ImageSelecting CD ROM Select Sharing to open the configuration dialog CD ROM/ISO Images Creating an Image Floppy ImagesDd if=/dev/cdrom of=/tmp/cdrom.image Drive redirection Driver Installation17. KVM Vision Viewer Setup step 17. Create a new Device Create a New Device18. New Device Drive Redirection SettingsOptions Users Change PasswordUser Console Settings14. User Console Settings Part 15. User Console Settings Part Keyboard/Mouse 17. Keyboard and Mouse SettingsPage Network Video19. Network Settings Part 19. Network Settings Part 20. Dynamic DNS Dynamic DNSPage 22. Device Security SecurityCertificate 23. Certificate Settings24. SSL Certificate Upload 25. Serial Port Serial PortPage Event Log Date And TimePage Page Board Summary Device StatusEven log Reset FunctionsUpdate Firmware Page 35 Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Key Codes F12 Printscreen Scroll Lock Break Insert Home Delete Video Modes Rack mount kit installation diagram