MULTITASKER™
| 4 x 4 | |
INPUTS |
| OUTPUTS |
1 a |
| 1 a |
1 b |
| 1 b |
2 a |
| 2 a |
2 b |
| 2 b |
3 a |
| 3 a |
3 b |
| 3 b |
4 a |
| 4 a |
4 b |
| 4 b |
|
| |
| 2 x 2 | |
INPUTS |
| OUTPUTS |
1 a |
| 1 a |
1 b |
| 1 b |
1 c |
| 1 c |
1 d |
| 1 d |
2 a |
| 2 a |
2 b |
| 2 b |
2 c |
| 2 c |
2 d |
| 2 d |
46.[HELP]
This command displays information available for the MultiTasker™ interface commands.
Command Format: [HELPCnUi]
Cn = Card ID (n = # from 1 to max slots)
Ui = Unit ID (i = # from 0 to 9)
Example:
In order to display the
7.3.SUMMARY OF COMMANDS Card Commands
1) [VER] | Receives software version |
2)[C] Receives status of the card
3) [CnS] | Save card settings |
4)[?] Show system cards
5) | [?C] | Show card information |
6) | [STA1] | Enable auto feedback |
7) | [STA0] | Disable auto feedback |
8) | [ON] | Turns on one or more outputs |
9) | [OFF] | Turns off one or more outputs |
10) | […S] | Save the command being sent |
11) | […F] | Show command feedback |
12) | […P] | Sets the path, preload for [SW] |
13) | [SW] | Switch preloaded output buffer |
14) | [IO] | Connect an input to output |
15) | [IO*] | Connect an input to all outputs |
16) | [CLR] | Reset card to default values |
17) | [OSI] | Set input offset |
18) | [OSO] | Set output offset |
19) | [FBD] | Feedback delay on/off |
ID Commands |
| |
20) | [RSI] | Reset Card IDs |
21) | [SIDn] | Set all Card IDs |
22) | [SIDnCi] | Set one Card ID |
23) | [SID+] | Set Card ID offset |
24) | [RSN] | Read Card slot number |
Group Commands | ||
25) | [WR] Groups multiple cards | |
26)[RMC] Remove members from group
27)[RMG] Delete group
28) | [RD] | Displays group members |
Volume/Matrix Commands | ||
29) | [TEST] | Test internal memory ICs |
30) | [VLO] | Set absolute output volume |
31) | [SEL] | Select input volume to adjust |
22 |