Allied Telesis AT-8000GS/24, AT-8000GS/POE manual Model Descriptions

Page 12

Chapter 1: Overview

Model Descriptions

AT-8000GS/24The following figure illustrates the AT-8000GS/24 front panel.

Figure 1 AT-8000GS/24 Gigabit Ethernet Switch Front Panel

 

 

 

 

 

 

 

Power

Diagnostic

10/100/1000Base-T Ports

SFP

Ports LED

 

LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1336

Stacking Mode Mode

LEDs LEDs Button

The AT-8000GS/24 front panel is configured as follows:

ˆ24 10/100/1000Mbps ports RJ-45 ports designated as 10/100/ 1000Base-T. The RJ-45 ports are designated as Ports 1-24.

ˆ4 SFP Ports — There are four 1000Base-X SFP combo ports. These ports are associated with the RJ-45 copper ports: 21, 22, 23 and 24.

ˆSelect Button — Selects the port LED indications.

The following figure illustrates the AT-8000GS/24 back panel.

Figure 2 AT-8000GS/24 Gigabit Ethernet Switch Back Panel

The AT-8000GS/24 back panel is configured as follows:

ˆPower Connector — AC power supply interface.

ˆ2 Stacking Ports — Two HDMI connector stacking ports .

ˆConsole Port — An RJ-45 connector supporting the RS-232 electrical specification.

ˆReset Button — Button to reset the device.

12

Image 12
Contents Installation Guide Page Preface Safety Symbols Used in this Document Symbol Meaning DescriptionWhere to Find Web-based Guides Management Software Updates Contacting Allied TelesisContent Page Overview ChapterAT-8000GS Switch Series Features ˆ PVEIeee Standards ˆ Ieee 802.3 10Base-T ˆ Ieee 802.3u 100Base-TXˆ 2 Stacking Ports Two Hdmi connector stacking ports Model DescriptionsAT-8000GS/24POE Gigabit Ethernet Switch Front Panel 24POEAT-8000GS/48 Gigabit Ethernet Switch Front Panel Port Descriptions 10/100/1000 Base Gigabit Ethernet Ports SFP PortRJ-45 Console Port ATI Reference Vendors and PartsLED Definitions System LEDsStacking Port LEDs IndicationLED Indication Description SYSLED RJ-45 Port LEDs on AT-8000GS/24 & AT-8000GS/48 LED Description LED Indication Functional DescriptionPort LED LinkLED FDX RJ-45 Port LEDs AT-8000GS/ 24POE Description IndicationPOE Green Off No link is established on the port Stacking Port LEDs Overview Installation Reviewing Safety Precautions AT-8000GS Series Gigabit Ethernet Switch Installation Guide Please return damaged units for servicing Preparing for Installation Installation PrecautionsPackage Contents Site Requirements UnpackingPage Installing the Device Desktop or Shelf InstallationAttaching the Mounting Brackets Connecting the Device Connecting Switch to a TerminalAC Power Connection Stacking Stacking Overview Stacking Ring TopologyStacking Members Unit ID Removing Replacing Stacking Chain TopologyStacking Exchanging Stacking Members Configuring Stacking Page Stacking Initial Configuration Configuration Overview Configuration Static IP Address and Subnet MaskIllustrated in the following example Troubleshooting Cannot connect using Telnet, Web browser, or Snmp softwareDevice not operating correctly Forgot or lost the password Technical Specifications Physical SpecificationsWeight Environmental SpecificationsPower Specifications Power Supply for Non-POE modelCertifications Cable, Port, and Pinout InformationPin Connections for the 10/100/1000 Ethernet Interface RJ-45 Pin AllocationAppendix a Technical Specifications
Related manuals
Manual 9 pages 17.85 Kb