Allied Telesis AT-8000GS/POE, AT-8000GS/24 manual

Page 31

AT-8000GS Series Gigabit Ethernet Switch Installation Guide

To unpack the device perform the following:

1.It is recommended to put on an ESD wrist strap and attach the ESD clip to a metal surface to act as ground. An ESD strap is not supplied with the device.

2.Place the container on a clean flat surface and cut all straps securing the container.

3.Open the container.

4.Carefully remove the device from the container and place it on a secure and clean surface.

5.Remove all packing material.

6.Inspect the product for damage. Report any damage immediately.

If any item is found missing or damaged, please contact your local ATI reseller for a replacement.

31

Image 31
Contents Installation Guide Page Preface Symbol Meaning Description Safety Symbols Used in this DocumentWhere to Find Web-based Guides Contacting Allied Telesis Management Software UpdatesContent Page Chapter Overviewˆ PVE AT-8000GS Switch Series Featuresˆ Ieee 802.3 10Base-T ˆ Ieee 802.3u 100Base-TX Ieee StandardsModel Descriptions ˆ 2 Stacking Ports Two Hdmi connector stacking ports24POE AT-8000GS/24POE Gigabit Ethernet Switch Front PanelAT-8000GS/48 Gigabit Ethernet Switch Front Panel ATI Reference Vendors and Parts Port Descriptions10/100/1000 Base Gigabit Ethernet Ports SFP Port RJ-45 Console PortSystem LEDs LED DefinitionsSYS Stacking Port LEDsIndication LED Indication DescriptionLED LED Description LED Indication Functional Description RJ-45 Port LEDs on AT-8000GS/24 & AT-8000GS/48LED Link PortLED FDX Description Indication RJ-45 Port LEDs AT-8000GS/ 24POEPOE Green Off No link is established on the port Stacking Port LEDs Overview Installation Reviewing Safety Precautions AT-8000GS Series Gigabit Ethernet Switch Installation Guide Please return damaged units for servicing Installation Precautions Preparing for InstallationSite Requirements Unpacking Package ContentsPage Desktop or Shelf Installation Installing the DeviceAttaching the Mounting Brackets Connecting Switch to a Terminal Connecting the DeviceAC Power Connection Stacking Stacking Ring Topology Stacking OverviewStacking Chain Topology Stacking Members Unit ID Removing ReplacingStacking Exchanging Stacking Members Configuring Stacking Page Stacking Initial Configuration Configuration Overview Static IP Address and Subnet Mask ConfigurationIllustrated in the following example Cannot connect using Telnet, Web browser, or Snmp software TroubleshootingDevice not operating correctly Forgot or lost the password Environmental Specifications Technical SpecificationsPhysical Specifications WeightCable, Port, and Pinout Information Power SpecificationsPower Supply for Non-POE model CertificationsRJ-45 Pin Allocation Pin Connections for the 10/100/1000 Ethernet InterfaceAppendix a Technical Specifications
Related manuals
Manual 9 pages 17.85 Kb