TRUST 1290Z POWERC@M OPTICAL ZOOM
12.2MGI PhotoSuite SE version 4.0
Installation
1.Insert the
2.Select the required language for the program. Click ‘OK’.
3.Follow the
- Under “File association” check at least “JPEG image” for PhotoSuite 4
4.You can use “register online” to register the program with MGI. Click “Finish” to close the Wizard. Restart the computer when requested to do so.
Use
1.Connect the camera to the computer, and switch on the camera.
2.Start MGI Photosuite 4 (Start – programs – MGI Photosuite – MGI PhotoSuite 4)
3.Click the “GET” button (Figure 8a)
4.Select “Computer” (Figure 8b)
5.Under “Look in” select the camera’s “removable disk”
6.Open the DCIM
7.Select the image and click “open”.
N.B.:a little time may be required to open the image. (a maximum of
30seconds)
8.You will then be able to edit the image (Figure 8c).
9.You can save the image on your computer. Click File and select “Save as..” The use of a new filename is recommended.
The Help function contains more information about the use of the software.
12.3MGI Photovista
1. | Insert the |
|
| Æ “MGI PhotoVista”. |
|
2. | Select the required language for the program. Click ‘OK’. |
|
3. | Follow the | U K |
4. | You can use “register online” to register the program with MGI. Click “Finish” |
to close the Wizard. Restart the computer when requested to do so.
Use
You can use this program to paste a number of photos to create a panorama photo. You can, for example, create a 360° photo.
Information about the initial use of the program is given in the “Quick Start Tutorial” (Help – Quick Start Tutorial”)
12.4Deleting software and drivers
Follow the steps given below if you wish to delete the camera’s driver, the MGI PhotoSuite/Photovista software or the Trust Photo Upload program from your computer
1.In the Control Panel, go to Software (Start Æ Settings Æ Control Panel Æ software)
15
