|
|
| TRUST 1290Z POWERC@M OPTICAL ZOOM |
|
|
|
|
|
|
| Symbol | Status | Function |
|
|
| Automatic | The camera automatically uses the flash when so |
|
|
|
| required. |
|
|
| On | The flash will be used for all photographs. This is |
|
|
|
| ideal when |
|
|
|
| N.B.: the flash is turned off in burst mode. |
|
|
| Off | The flash is not used. |
|
|
| The flash will be automatically used when there is |
| |
|
| reduction | insufficient light; an advance flash will be used to |
|
|
|
| reduce the |
|
Table 6: summary of flash settings
9 Recording video clips (
)
You can use this function to record video clips of a maximum duration of 30 seconds.
1.Turn the selector dial to video mode (
)
2.Press the shutter release button to begin recording. The camera will then make a recording until 30 seconds have passed or the shutter release button is pressed again.
N.B.:the digital zoom cannot be used.
N.B.:you cannot zoom in or out during the recording.
10 Viewing pictures / videos
10.1Display on the camera (
)
To view photos turn the selector dial to Playback mode and switch on the camera. The last photo you took will be displayed.
The default Playback method is to display individual photos on the full screen. Press the “Å” button or “Æ” button to browse through the photos stored in the memory.
N.B.:you will need to wait about 5 seconds before the photo is shown on the LCD display, allowing you to browse to the next photo
U K
9
