AT-8000GS Series Gigabit Ethernet Switch Installation Guide
Port Descriptions
10/100/1000 Base-
T Gigabit
Ethernet Ports
SFP Port
RJ-45 Console Port
The 10/100/1000Base-T Gigabit ports are RJ-45 ethernet connectors. The 10/100/1000 Mbps ports support half- and full-duplex mode.
Small Form Factor Pluggable (SFP) Optical Transceivers are integrated duplex data links for bi-directional communication over optical fiber, designed for high-speed Fiber Channel data links. The SFP port is designated as 100Base-FX or 1000Base-LX/SX.
Table 1 lists the supported SFPs:
| Table 1 SFP Support |
| |
ATI Reference | Vendors and Parts |
| |
| |
AT-SPSX | 500m 850nm 1000Base-SX Small Form Pluggable - |
| Hot Swappable |
| |
AT-SPLX10 | 10km 1310nm 1000Base-LX Small Form Pluggable |
| - Hot Swappable |
| |
AT-SPLX40 | 40km 1310nm 1000Base-LX Small Form Pluggable |
| - Hot Swappable |
| |
AT-SPZX80 | 80km 1550nm 1000Base-ZX Small Form Pluggable |
| - Hot Swappable |
| |
AT-SPBD10-13 | 10km Bi-Directional GbE SMF SFP 1310Tx/1490Rx |
| - Hot Swappable |
| |
AT-SPBD10-14 | 10km Bi-Directional GbE SMF SFP 1490Tx/1310Rx |
| - Hot Swappable |
| |
The RJ-45 port on the rear panel is an asynchronous serial console port supporting the RS-232 electrical specification. The port is used to connect the device to a console managing the device. This interface configuration is as follows:
Eight data bits.
One stop bit.
No parity.
Baud rate is 115,200 (default). The user can change the rate from 115,200 down to 2400 bps.
