Allied Telesis AT-8000GS/POE, AT-8000GS/24 manual Attaching the Mounting Brackets

Page 33

AT-8000GS Series Gigabit Ethernet Switch Installation Guide

Disconnect all cables from the unit before mounting the device in a rack or cabinet.

When mounting multiple devices into a rack, mount the devices from the bottom up.

To install the device in a rack, perform the following:

1.It is recommended to put on an ESD wrist strap and attach the ESD clip to a metal surface to act as ground. An ESD strap is not supplied with the device.

2.Place the device on a flat and stable surface.

3.Place the supplied rack-mounting bracket on one side of the device ensuring the mounting holes on the device line up to the mounting holes on the rack mounting bracket. The following figure illustrates where the mounting brackets are placed on the device.

Figure 2: Attaching the Mounting Brackets

4.Insert the supplied screws into the rack mounting holes and tighten with a screwdriver.

5.Repeat the process for the rack-mounting bracket on the other side of the device.

6.Insert the device into the 19-inch rack and secure the unit to the rack with the rack screws (not provided by the ATI supplier). When securing, fasten the lower pair of screws before the upper pair of screws. This ensures that the weight of the unit is evenly distributed during installation. Ensure that the ventilation holes are not obstructed.

7.Secure the unit to the rack with the rack screws. Fasten the lower pair of screws before the upper pair of screws. This ensures that the weight of the unit is evenly distributed during installation. Ensure that the ventilation holes are not obstructed.

33

Image 33
Contents Installation Guide Page Preface Symbol Meaning Description Safety Symbols Used in this DocumentWhere to Find Web-based Guides Contacting Allied Telesis Management Software UpdatesContent Page Chapter Overviewˆ PVE AT-8000GS Switch Series Featuresˆ Ieee 802.3 10Base-T ˆ Ieee 802.3u 100Base-TX Ieee StandardsModel Descriptions ˆ 2 Stacking Ports Two Hdmi connector stacking ports24POE AT-8000GS/24POE Gigabit Ethernet Switch Front PanelAT-8000GS/48 Gigabit Ethernet Switch Front Panel 10/100/1000 Base Gigabit Ethernet Ports SFP Port Port DescriptionsRJ-45 Console Port ATI Reference Vendors and PartsSystem LEDs LED DefinitionsIndication Stacking Port LEDsLED Indication Description SYSLED LED Description LED Indication Functional Description RJ-45 Port LEDs on AT-8000GS/24 & AT-8000GS/48Port LED LinkLED FDX RJ-45 Port LEDs AT-8000GS/ 24POE Description IndicationPOE Green Off No link is established on the port Stacking Port LEDs Overview Installation Reviewing Safety Precautions AT-8000GS Series Gigabit Ethernet Switch Installation Guide Please return damaged units for servicing Installation Precautions Preparing for InstallationSite Requirements Unpacking Package ContentsPage Desktop or Shelf Installation Installing the DeviceAttaching the Mounting Brackets Connecting the Device Connecting Switch to a TerminalAC Power Connection Stacking Stacking Ring Topology Stacking OverviewStacking Chain Topology Stacking Members Unit ID Removing ReplacingStacking Exchanging Stacking Members Configuring Stacking Page Stacking Initial Configuration Configuration Overview Static IP Address and Subnet Mask ConfigurationIllustrated in the following example Troubleshooting Cannot connect using Telnet, Web browser, or Snmp softwareDevice not operating correctly Forgot or lost the password Physical Specifications Technical SpecificationsWeight Environmental SpecificationsPower Supply for Non-POE model Power SpecificationsCertifications Cable, Port, and Pinout InformationRJ-45 Pin Allocation Pin Connections for the 10/100/1000 Ethernet InterfaceAppendix a Technical Specifications
Related manuals
Manual 9 pages 17.85 Kb