Allied Telesis AT-8000GS/24, AT-8000GS/POE manual Illustrated in the following example

Chapter 4: Initial Configuration

illustrated in the following example.

Console# show ip interface
Gateway IP Address	Activity Status	Type
-----------------------------	----------------	---------
100.1.1.254	active	static
IP Address	I/F	Type
-----------------------------	----------------	---------
100.1.1.1/16	vlan 1	static

User Name A user name is used to manage the device remotely, for example through SSH, Telnet, or the Web interface. To gain complete administrative (super-user) control over the device, the highest privilege (15) must be specified.

Note

Only an administrator (super-user) with the highest privilege level

(15)is allowed to manage the device through the Web browser interface.

For more information about the privilege level, see the CLI Reference

Guide.

The configured user name is entered as a login name for remote management sessions. To configure user name and privilege level, enter the command at the system prompt as shown in the configuration example:

Console> enable

Console# configure

Console(config)# username admin password lee privilege 15

46