Allied Telesis AT-8000GS/24, AT-8000GS/POE manual Reviewing Safety Precautions

Page 26

Chapter 2: Installation

Reviewing Safety Precautions

Please review the following safety precautions before you begin to install the chassis or any of its components.

Note

The indicates that a translation of the safety statement is available in a PDF document titled “Translated Safety Statements” (613-000990) on the Allied Telesis website at www.alliedtelesis.com.

Warning: Class 1 Laser product. L1

Warning: Do not stare into the laser beam. L2

Warning: To prevent electric shock, do not remove the cover. No user-serviceable parts inside. This unit contains hazardous voltages and should only be opened by a trained and qualified technician. To avoid the possibility of electric shock, disconnect electric power to the product before connecting or disconnecting the LAN cables. E1

Warning: Do not work on equipment or cables during periods of lightning activity. E2

Warning: Power cord is used as a disconnection device. To de- energize equipment, disconnect the power cord. E3

Warning: Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltages on accessible metal parts. E4

Pluggable Equipment. The socket outlet shall be installed near the equipment and shall be easily accessible. E5

Caution: Air vents must not be blocked and must have free access to the room ambient air for cooling. E6

26

Image 26

Contents Installation Guide Page Preface Safety Symbols Used in this Document Symbol Meaning DescriptionWhere to Find Web-based Guides Management Software Updates Contacting Allied TelesisContent Page Overview ChapterAT-8000GS Switch Series Features ˆ PVEIeee Standards ˆ Ieee 802.3 10Base-T ˆ Ieee 802.3u 100Base-TXˆ 2 Stacking Ports Two Hdmi connector stacking ports Model DescriptionsAT-8000GS/24POE Gigabit Ethernet Switch Front Panel 24POEAT-8000GS/48 Gigabit Ethernet Switch Front Panel RJ-45 Console Port Port Descriptions10/100/1000 Base Gigabit Ethernet Ports SFP Port ATI Reference Vendors and PartsLED Definitions System LEDsLED Indication Description Stacking Port LEDsIndication SYSLED RJ-45 Port LEDs on AT-8000GS/24 & AT-8000GS/48 LED Description LED Indication Functional DescriptionLED FDX PortLED Link POE RJ-45 Port LEDs AT-8000GS/ 24POEDescription Indication Green Off No link is established on the port Stacking Port LEDs Overview Installation Reviewing Safety Precautions AT-8000GS Series Gigabit Ethernet Switch Installation Guide Please return damaged units for servicing Preparing for Installation Installation PrecautionsPackage Contents Site Requirements UnpackingPage Installing the Device Desktop or Shelf InstallationAttaching the Mounting Brackets AC Power Connection Connecting the DeviceConnecting Switch to a Terminal Stacking Stacking Overview Stacking Ring TopologyStacking Members Unit ID Removing Replacing Stacking Chain TopologyStacking Exchanging Stacking Members Configuring Stacking Page Stacking Initial Configuration Configuration Overview Configuration Static IP Address and Subnet MaskIllustrated in the following example Device not operating correctly TroubleshootingCannot connect using Telnet, Web browser, or Snmp software Forgot or lost the password Weight Technical SpecificationsPhysical Specifications Environmental SpecificationsCertifications Power SpecificationsPower Supply for Non-POE model Cable, Port, and Pinout InformationPin Connections for the 10/100/1000 Ethernet Interface RJ-45 Pin AllocationAppendix a Technical Specifications

Related manuals

Manual 9 pages 17.85 Kb