Allied Telesis AT-GS950/8 manual Basic Switch Parameters

Page 18

Chapter 2: Basic Switch Parameters

Configuring the IP Address, Subnet Mask, Gateway Address, and BOOTP or DHCP

Caution

Allied Telesis strongly recommends that you record the MAC address of this switch, as shown on the Basic Switch Information Page (Figure 4) before you configure or enable the BOOTP or DHCP options of the Get IP From parameter. After you enable either option, contact your network administrator for the IP address from the BOOTP or DHCP server that corresponds to the switch’s MAC address.

This procedure explains how to assign an IP address, subnet mask, and gateway address to the switch.

To set the switch’s IP configuration, perform the following procedure:

1.From the main menu, select Basic Switch Information. The Basic Switch Information page is shown in Figure 4.

Figure 4. Basic Switch Information Page

2.To set the switch’s IP address, in the Get IP From field, choose one of the following from the list:

Manual - Allows you to enter static IP address information:

18

Image 18

Contents Management Software Page Contents Contents Figures Figures Preface Where to Find Web-based Guides Management Software Updates Contacting Allied TelesisPreface Getting Started ChapterStarting a Management Session Main Save Configuration Click Apply Saving Changes Quitting a Management Session Getting Started Basic Switch Parameters Basic Switch Parameters AT-S82 Management Software User’s Guide Enabled DisabledDisabling or Enabling Ping Blocking Enabling or Disabling 802.1X Forwarding Control Changing the Administrator’s Password Rebooting the Switch Resetting the Switch and Retaining the IP Address Reset Click Apply Switch is resetAT-S82 Management Software User’s Guide Downloading New Firmware Download Status MessagePort Configuration Configuring Port Parameters Port is enabled. This is the default Copper FiberTrunking Trunking Overview Trunking Guidelines Trunking AlgorithmAT-S82 Management Software User’s Guide Configuring the Trunking Algorithm DAxorSASetting up the Trunk Port Trunking ConfigurationTrunking Port Mirroring Port Mirroring Overview Configuring Port Mirroring Port Mirroring VLANs Vlan Features Increased Performance Improved Manageability SecurityAT-S82 Management Software User’s Guide Vlan Overview Vlan Identifier Vlan Port MembersIncoming Outgoing Tagged Untagged Frames Guidelines for Creating a Vlan Working with VLANs Vlan DetailDisplaying all VLANs Click Show All Static Vlan EntriesVlan Protected Ports Vlan Protected Ports Vlan ExampleAT-S82 Management Software User’s Guide VLANs Class of Service Class of Service Overview Mapping Ports to Egress QueuesIeee 802.1p Priority Level Port Priority Queue Port Egress Queue Maximum Number Packets Mapping Priorities to Queues Setting Up the Schedule Assigning Priority to Ports Class of Service Spanning Tree Protocol STP Spanning Tree Overview Bridge Priority RootPath Costs and Port Costs Increment Bridge PriorityPort Speed Port Cost Port Priority Increment Port PriorityHello Time and Bridge Protocol Data Units BPDUs Point-to-Point and Edge Ports Edge Port Spanning Tree and VLANs Spanning Tree Protocol STP Configuring Spanning Tree Rstp STP CompatibleDisabled Configuring STP Port Settings True YesFalse AutoSpanning Tree Protocol STP

Related manuals

Manual 44 pages 22.06 Kb