Allied Telesis AT-GS950/8 manual AT-S82 Management Software User’s Guide

Page 25

AT-S82 Management Software User’s Guide

Returning the AT-S82 Management Software to the Factory Default Values

This procedure returns all AT-S82 management software parameters to their default values, including the IP address, which is reset to 192.168.1.1. To reset all the parameters except the IP address, follow the procedure in “Resetting the Switch and Retaining the IP Address” on page 24.

Caution

This procedure causes the switch to reboot. The switch does not forward network traffic during the reboot process. Some network traffic may be lost.

To return the AT-S82 management software to the default settings, perform the following procedure:

1.From the main menu, select Reset System. The Reset System page is shown in Figure 8.

Figure 8. Reset System Page

2.Click Apply.

The switch returns its operating parameters to the default values and begins to reload the AT-S82 management software. This process takes approximately one minute to complete. You cannot manage the switch during the reboot. After the reboot is finished, you must start a new web browser management session if you want to continue to manage the switch.

25

Image 25

Contents Management Software Page Contents Contents Figures Figures Preface Where to Find Web-based Guides Contacting Allied Telesis Management Software UpdatesPreface Chapter Getting StartedStarting a Management Session Main Saving Changes Save Configuration Click ApplyQuitting a Management Session Getting Started Basic Switch Parameters Basic Switch Parameters AT-S82 Management Software User’s Guide Disabled EnabledDisabling or Enabling Ping Blocking Enabling or Disabling 802.1X Forwarding Control Changing the Administrator’s Password Rebooting the Switch Reset Click Apply Switch is reset Resetting the Switch and Retaining the IP AddressAT-S82 Management Software User’s Guide Download Status Message Downloading New FirmwarePort Configuration Configuring Port Parameters Port is enabled. This is the default Fiber CopperTrunking Trunking Guidelines Trunking Algorithm Trunking OverviewAT-S82 Management Software User’s Guide DAxorSA Configuring the Trunking AlgorithmPort Trunking Configuration Setting up the TrunkTrunking Port Mirroring Port Mirroring Overview Configuring Port Mirroring Port Mirroring VLANs Increased Performance Improved Manageability Security Vlan FeaturesAT-S82 Management Software User’s Guide Vlan Identifier Vlan Port Members Vlan OverviewIncoming Outgoing Tagged Untagged Frames Guidelines for Creating a Vlan Vlan Detail Working with VLANsClick Show All Static Vlan Entries Displaying all VLANsVlan Protected Ports Vlan Example Protected Ports VlanAT-S82 Management Software User’s Guide VLANs Class of Service Mapping Ports to Egress Queues Class of Service OverviewIeee 802.1p Priority Level Port Priority Queue Port Egress Queue Maximum Number Packets Mapping Priorities to Queues Setting Up the Schedule Assigning Priority to Ports Class of Service Spanning Tree Protocol STP Bridge Priority Root Spanning Tree OverviewIncrement Bridge Priority Path Costs and Port CostsPort Speed Port Cost Increment Port Priority Port PriorityHello Time and Bridge Protocol Data Units BPDUs Point-to-Point and Edge Ports Edge Port Spanning Tree and VLANs Spanning Tree Protocol STP Configuring Spanning Tree STP Compatible RstpDisabled Configuring STP Port Settings False YesTrue AutoSpanning Tree Protocol STP

Related manuals

Manual 44 pages 22.06 Kb