Allied Telesis AT-GS950/8 manual Disabling or Enabling Ping Blocking, Enabled, Disabled

Page 20

Chapter 2: Basic Switch Parameters

Disabling or Enabling Ping Blocking

You can allow the switch to respond to ping requests by setting the Ping Blocking parameter. The default setting is enabled, which means that the switch does not respond to ping requests.

To disable or enable ping blocking, perform the following procedure:

1.From the main menu, select Basic Switch Information.

The Basic Switch Information page is shown in Figure 4 on page 18.

2.For Ping Blocking, choose one of the following:

Enabled

The switch does not respond to ping requests. This is the default.

Disabled

The switch responds to ping requests. Allied Telesis recommends that you choose this setting.

3.Click Apply to implement your changes.

4.To save the settings to the configuration file, from the main menu, select Save Configuration.

The Save Configuration page is shown in Figure 3 on page 14.

5.Click Apply.

20

Image 20

Contents Management Software Page Contents Contents Figures Figures Preface Where to Find Web-based Guides Management Software Updates Contacting Allied TelesisPreface Getting Started ChapterStarting a Management Session Main Save Configuration Click Apply Saving ChangesQuitting a Management Session Getting Started Basic Switch Parameters Basic Switch Parameters AT-S82 Management Software User’s Guide Disabling or Enabling Ping Blocking EnabledDisabled Enabling or Disabling 802.1X Forwarding Control Changing the Administrator’s Password Rebooting the Switch Resetting the Switch and Retaining the IP Address Reset Click Apply Switch is resetAT-S82 Management Software User’s Guide Downloading New Firmware Download Status MessagePort Configuration Configuring Port Parameters Port is enabled. This is the default Copper FiberTrunking Trunking Overview Trunking Guidelines Trunking AlgorithmAT-S82 Management Software User’s Guide Configuring the Trunking Algorithm DAxorSASetting up the Trunk Port Trunking ConfigurationTrunking Port Mirroring Port Mirroring Overview Configuring Port Mirroring Port Mirroring VLANs Vlan Features Increased Performance Improved Manageability SecurityAT-S82 Management Software User’s Guide Vlan Overview Vlan Identifier Vlan Port MembersIncoming Outgoing Tagged Untagged Frames Guidelines for Creating a Vlan Working with VLANs Vlan DetailDisplaying all VLANs Click Show All Static Vlan EntriesVlan Protected Ports Vlan Protected Ports Vlan ExampleAT-S82 Management Software User’s Guide VLANs Class of Service Class of Service Overview Mapping Ports to Egress QueuesIeee 802.1p Priority Level Port Priority Queue Port Egress Queue Maximum Number Packets Mapping Priorities to Queues Setting Up the Schedule Assigning Priority to Ports Class of Service Spanning Tree Protocol STP Spanning Tree Overview Bridge Priority RootPath Costs and Port Costs Increment Bridge PriorityPort Speed Port Cost Port Priority Increment Port PriorityHello Time and Bridge Protocol Data Units BPDUs Point-to-Point and Edge Ports Edge Port Spanning Tree and VLANs Spanning Tree Protocol STP Configuring Spanning Tree Rstp STP CompatibleDisabled Configuring STP Port Settings Yes FalseTrue AutoSpanning Tree Protocol STP

Related manuals

Manual 44 pages 22.06 Kb