Allied Telesis AT-GS950/8 manual Protected Ports Vlan Example

Page 50

Chapter 6: VLANs

Protected Ports VLAN

You use the protected ports VLAN feature when you want to prevent ports from communicating with one another, but you want them all to have access to common resources. For example, in a hotel or apartment complex, the computer in each room or apartment needs to be isolated from one another, but they all need access to the internet or a server. This feature is called traffic segmentation. You set up traffic segmentation by selecting the ports connected to each room or apartment and identifying them as isolated ports, and then connecting one port to the WAN.

In Figure 19, the connection to the WAN is assigned to fiber port 8. This port is configured as the Primary (Ingress) port for the switch. Because it is the Primary port, it has full duplex capability to communicate with ports 1- 7R. Ports 1-7R are configured to be isolated from one another, and therefore cannot communicate with one another.

912WAN

Figure 19. Protected Ports VLAN Example

Figure 20 shows what the Protected Port page for Figure 19 looks like.

Figure 20. Protected Port Page for Figure 19

To set up a protected ports VLAN, perform the following procedure:

50

Image 50

Contents Management Software Page Contents Contents Figures Figures Preface Where to Find Web-based Guides Management Software Updates Contacting Allied TelesisPreface Getting Started ChapterStarting a Management Session Main Save Configuration Click Apply Saving ChangesQuitting a Management Session Getting Started Basic Switch Parameters Basic Switch Parameters AT-S82 Management Software User’s Guide Disabling or Enabling Ping Blocking EnabledDisabled Enabling or Disabling 802.1X Forwarding Control Changing the Administrator’s Password Rebooting the Switch Resetting the Switch and Retaining the IP Address Reset Click Apply Switch is resetAT-S82 Management Software User’s Guide Downloading New Firmware Download Status MessagePort Configuration Configuring Port Parameters Port is enabled. This is the default Copper FiberTrunking Trunking Overview Trunking Guidelines Trunking AlgorithmAT-S82 Management Software User’s Guide Configuring the Trunking Algorithm DAxorSASetting up the Trunk Port Trunking ConfigurationTrunking Port Mirroring Port Mirroring Overview Configuring Port Mirroring Port Mirroring VLANs Vlan Features Increased Performance Improved Manageability SecurityAT-S82 Management Software User’s Guide Vlan Overview Vlan Identifier Vlan Port MembersIncoming Outgoing Tagged Untagged Frames Guidelines for Creating a Vlan Working with VLANs Vlan DetailDisplaying all VLANs Click Show All Static Vlan EntriesVlan Protected Ports Vlan Protected Ports Vlan ExampleAT-S82 Management Software User’s Guide VLANs Class of Service Class of Service Overview Mapping Ports to Egress QueuesIeee 802.1p Priority Level Port Priority Queue Port Egress Queue Maximum Number Packets Mapping Priorities to Queues Setting Up the Schedule Assigning Priority to Ports Class of Service Spanning Tree Protocol STP Spanning Tree Overview Bridge Priority RootPath Costs and Port Costs Increment Bridge PriorityPort Speed Port Cost Port Priority Increment Port PriorityHello Time and Bridge Protocol Data Units BPDUs Point-to-Point and Edge Ports Edge Port Spanning Tree and VLANs Spanning Tree Protocol STP Configuring Spanning Tree Rstp STP CompatibleDisabled Configuring STP Port Settings True YesFalse AutoSpanning Tree Protocol STP

Related manuals

Manual 44 pages 22.06 Kb