Allied Telesis AT-GS950/8 manual Enabling or Disabling 802.1X Forwarding Control

Page 21

AT-S82 Management Software User’s Guide

Enabling or Disabling 802.1X Forwarding Control

This procedure describes how to enable or disable 802.1x forwarding control. The default setting is disabled. When you disable this feature, 802.1x packets are not forwarded. If this feature is enabled, these packets are forwarded to their destination which might be a switch running an authentication protocol.

To disable or enable 802.1X forwarding control, perform the following procedure:

1.From the main menu, select Basic Switch Information.

The Basic Switch Information page is shown in Figure 4 on page 18.

2.For 802.1X Forwarding Control, choose one of the following:

Enabled

The switch does not respond to ping requests. This is the default.

Disabled

The switch responds to ping requests.

3.Click Apply to implement your changes.

4.To save the settings to the configuration file, from the main menu, select Save Configuration.

The Save Configuration page is shown in Figure 3 on page 14.

5.Click Apply.

21

Image 21

Contents Management Software Page Contents Contents Figures Figures Preface Where to Find Web-based Guides Contacting Allied Telesis Management Software UpdatesPreface Chapter Getting StartedStarting a Management Session Main Saving Changes Save Configuration Click ApplyQuitting a Management Session Getting Started Basic Switch Parameters Basic Switch Parameters AT-S82 Management Software User’s Guide Enabled DisabledDisabling or Enabling Ping Blocking Enabling or Disabling 802.1X Forwarding Control Changing the Administrator’s Password Rebooting the Switch Reset Click Apply Switch is reset Resetting the Switch and Retaining the IP AddressAT-S82 Management Software User’s Guide Download Status Message Downloading New FirmwarePort Configuration Configuring Port Parameters Port is enabled. This is the default Fiber CopperTrunking Trunking Guidelines Trunking Algorithm Trunking OverviewAT-S82 Management Software User’s Guide DAxorSA Configuring the Trunking AlgorithmPort Trunking Configuration Setting up the TrunkTrunking Port Mirroring Port Mirroring Overview Configuring Port Mirroring Port Mirroring VLANs Increased Performance Improved Manageability Security Vlan FeaturesAT-S82 Management Software User’s Guide Vlan Identifier Vlan Port Members Vlan OverviewIncoming Outgoing Tagged Untagged Frames Guidelines for Creating a Vlan Vlan Detail Working with VLANsClick Show All Static Vlan Entries Displaying all VLANsVlan Protected Ports Vlan Example Protected Ports VlanAT-S82 Management Software User’s Guide VLANs Class of Service Mapping Ports to Egress Queues Class of Service OverviewIeee 802.1p Priority Level Port Priority Queue Port Egress Queue Maximum Number Packets Mapping Priorities to Queues Setting Up the Schedule Assigning Priority to Ports Class of Service Spanning Tree Protocol STP Bridge Priority Root Spanning Tree OverviewIncrement Bridge Priority Path Costs and Port CostsPort Speed Port Cost Increment Port Priority Port PriorityHello Time and Bridge Protocol Data Units BPDUs Point-to-Point and Edge Ports Edge Port Spanning Tree and VLANs Spanning Tree Protocol STP Configuring Spanning Tree STP Compatible RstpDisabled Configuring STP Port Settings False YesTrue AutoSpanning Tree Protocol STP

Related manuals

Manual 44 pages 22.06 Kb