Allied Telesis at-8116 manual Init-nvram, Get-sw-file, Set-sw-file, Get-tftp-srvr, Set-tftp-srvr

Page 24

System Commands

init-nvram

This command resets the non-volatile RAM (NVRAM) on the SNMP Agent to default values. Change will take effect after boot (warm or cold reset).

get-sw-file

This command retrieves the SNMP Agent Software ﬁle name.

set-sw-file

set-sw-file <filename>

Sets the name of the ﬁle downloaded by TFTP.This name must match the name of the agent software ﬁle on the TFTP server.

get-tftp-srvr

This command retrieves the IP address of the TFTP server which the

Agent will use to download software (see sw-dnld).

set-tftp-srvr

set-tftp-srvr < IP address>

Sets the IP address of the TFTP server used for downloading.

set-tftp-mode

This command sets the TFTP download mode.

SYS_console> set-tftp-mode {clientserver}

Switch Tftp client/server is enabled for next download.

Refer to Appendix A, Software Downloading for more details.

get-tftp-mode

This command retrieves the TFTP download mode and requires no argument.

4-4

Image 24

Contents E R ’ S G U I D E Page Table of Contents Appendix B Administrative Interface RmonAdministrative Interface Accessing the Snmp Agent Network Management SystemsSystem Requirements VT100 Terminal Settings Software RequirementsTesting the Installation Accessing the Command Line Interface RemotelyPage Command Line Interface Features of the Command Line InterfaceEntering Commands SYSconsole pin Command pin not foundGet-comm read write Get-comm read Get-comm writeSYSconsole ping 129.1.1.7 ? ping IP traffic generator System Commands System CommandsSYSconsolesystem Command Line Interface Structure SYSconsoleget-c? Command get-c not found2Commands Matching get-c Commands Groups SYSconsole?Console Commands Help-kbdSYSconsolehelp-kbd Console Function KeysLogin BannerClear LogoutSet-attr-prompt Set-attr-msgSet-attr-text Set-passwdConsole Commands System Commands Sys-statSystem Commands SYSconsoleWarm-reset Cold-resetGet-stst-level Set-stst-level levelInit-nvram Get-sw-fileSet-sw-file Get-tftp-srvrSw-dnld Set-fg-paramStart-fg Stop-fg IP Commands Get-ipSet-ip Set-ipIPaddressIf no IP Config. is defined Get-ip-cfgSet-ip-cfg Set-ip-cfg IPaddress netmask broadcastClear-ip-cfg SYSconsoleget-gatew Default gateway address is Get-gatewSet-gatew Set-gatew IPaddressAddress Resolution Commands Get-arp-tblDel-arp-entry SYSconsoleget-arp-tbl IfIndex IpAddressAdd-arp-entry 194.090.136.126Ping Commands PingPing-stop SYSconsoleping 194.90.136.23SYSconsoleping 194.90.136.20 Echo RequestsEcho Responses Ping process press CR for prompt SYSconsole Echo responses Ping process press Ping-stop Stop the active ping ProcessPage Snmp Commands Snmp Community String CommandsGet-comm Get-comm readwriteSnmp Trap Message Commands Set-commGet-auth Set-authGet-traps Add-trapDel-trap Get-rmon-stateSYSconsoledel-trap SYSconsoleget-rmon-stateSwitching Database Commands LockLearning Table Get-lt-entryGet-lt-16 SYStelnetget-lt-16Find-lt-addr SYStelnetﬁnd-lt-addr 0060e8112265Del-lt-entry SYSconsolefind-lt-addrMAC Address 01-02-03-04-05-06 not in LT Del-lt-entry indexDel-lt-addr Add-lt-entryGet-lt-age SYSconsoledel-lt-entrySet-lt-age Set-lt-age runnvramall agingtimeSYSconsoleset-lt-age all Page Virtual LAN Commands Type vlan to view the related commands SYSconsolevlanVirtual Broadcast Domains VBC Get-con-matrixSYSconsoleget-con-matrix ==========================Del-vbc-domain Set-vbc-domain Set-vbc-domain runnvramall portlistSet-vbc-domain all Del-vbc-domain runnvram domainidGet-vbc-matrix SYSconsoleget-vbc-matrixSecurity VLANs Set-sec-vlanSvlan Groups Del-sec-vlan LANs 0 0 0 0 0 0 0 1 1 1 1 1 13 4 5 6 7 8 9 0 1 Del-sec-vlan runnvram lanidGet-svlan-tbl Get-svlan-tbl runnvramSYSconsoleget-svlan-tbl run + + + + + + + + SYSconsoleGet-svlan-matrix Get-svlan-matrix runnvram SYSconsoleget-svlan-matrix runPage Port Monitoring Commands Set-mon-portStop-mon Get-nv-monSave-mon Clear-nv-monPort Conﬁguration Commands Get-port-cfgSYSconsoleget-port-cfg Set-port-dplex Set-port-dplex portnumber halffullSYSconsoleset-port-dplex 2 full Set-speed-sel Set-port-stateSet-aggr-mode SYSconsoleset-aggr-modePage Switching Statistics Commands Clr-cntGet-eth-cnt Switching Statistics Commands Get-colls-cnt Get-rmon-cntGet-sdist-cnt SYSconsoleget-colls-cntGet-mgm-brcnt =============================================15637 1123754 Spanning Tree Commands Set-stp enabledisableGet-stp Set-stpGet-st-bcfg Get-st-pcfgGet-st-syscfg Set-br-prioSet-prt-prio Set-prt-enbSet-prt-pcost Page Using an Snmp Manager Configuring the AT-8116 Snmp AgentSYSconsoleset-gatew Read public New read communityPage Software Troubleshooting Page Tftp Client Download Procedure Software DownloadingRequirements Tftp Server Download Procedure System Defaults System Default ValuesPage Command Line Reference Table C-1 Console CommandsTable C-2 System Commands Table C-3IP Commands Table C-4SNMP CommandsTable C-5 Switching Database Commands Table C-6 Virtual LAN CommandsTable C-7Port Conﬁguration Commands Table C-8Switching Statistics CommandsTable C-9Spanning Tree Commands