APC 78-10169-02 manual Check the Start a Web browser when finished check box

Page 24

Chapter 2 Monitoring the System

Monitoring a UPS

While the system is attempting to communicate with the UPS, the first screen of the SNMP/Web Card Management Wizard continues to be displayed (this process might take several minutes). When the system is ready for you to continue with configuring the UPS, the Found An Unconfigured Management Card dialog box displays.

Step 4 Enter the following information in the Found An Unconfigured Management Card dialog box:

•In the System IP Address field, enter the UPS IP address.

•In the Subnet Mask field, enter the Cisco ICS 7750 subnet mask.

•In the Default Gateway field, enter the IP address of the SPE running System Manager.

•Check the Start a Web browser when finished check box.

Step 5 Click Finish.

A dialog box displays, informing you that your default Web browser will start and that your User Name and password for UPS configuration will be apc.

Step 6 Click OK.

Step 7 Click Next.

Step 8 In the Installation Options dialog box, choose Express.

Step 9 Click Next.

Step 10 Choose the type of connection (LAN) that you are using to communicate with the UPS.

Step 11 Click Next.

Step 12 Click Close.

Step 13 Click OK.

Step 14 If a Web browser (Netscape Communicator or Microsoft Internet Explorer, for example) is not already running, open it. Enter your UPS IP address in the Location or Address field of the browser.

The Username and Password Required dialog box displays.

Step 15 In the User Name and Password fields, enter apc.

Step 16 Click OK.

The APC Status Summary page appears in your browser.

 

Cisco ICS 7750 Administration and Troubleshooting Guide

2-24

78-10169-02 Rev. B0

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Monitoring the System Alarms Alarm NotificationAlarm Levels How to Access Log MessagesLogging How to Read Log Messages Handling Log Messages with ICS System ManagerSaving Log Messages to a Syslog Server Element Example Format Description StringFacilities Severity LevelsKeyword Description Keyword Level Description Syslog DefinitionHow to Change the Log Configuration Default Log Configuration Configuring the Syslog Daemon on Unix Syslog ServersConfiguration Parameters Default Setting Task Command Changing Syslog Server LoggingSnmp Basics Snmp ComponentsMajor Components of SNMP-Managed Networks Using Snmp with MIB Variables Snmp Management Information BaseOperation Description Snmp NetworkUnderstanding Traps Supported MIBsUnderstanding Community Strings Cisco ICS 7750 TrapsMonitoring with ICS System Manager Modifying the Base Community StringUsing CiscoWorks2000 for Network Management Monitoring with CiscoWorks2000CiscoWorks2000 Applications Monitoring with Cisco IOS Software Evaluating System PerformanceSnmp and the CiscoWorks2000 Interface In-Band Versus Out-of-Band Monitoring Evaluating Reachability and Response TimesEvaluating Traffic Loads Using show Commands Common show Commands Connecting and Powering Up the UPS Components Searching and Filtering Output of show Commands Monitoring a UPS Through a Serial Connection on Start Programs APC Card Management Wizard Check the Start a Web browser when finished check box Choose Start Run SetUPSHostName -HostName Name Verify that the Cisco ICS 7750 can communicate with the UPS 78-10169-02 Rev. B0
Top Page Image Contents