APC 78-10169-02 manual SetUPSHostName -HostName Name

Page 26

Chapter 2 Monitoring the System

Monitoring a UPS

Step 32 Log in as an administrator (userID administrator), and enter your password (the default is changeme).

Step 33 Enter the following command to stop the FMMServer on the SPE:

net stop FmmServer

Step 34 Change to the FMM directory:

cd Program Files\Cisco Systems\ics\FMM

Step 35 Install the UPS:

installups

Step 36 Start FmmServer:

net start FmmServer

Step 37 Set the host name of the UPS, where Name is the UPS IP address:

SetUPSHostName -HostName Name

Step 38 Continue with “Verifying That the Cisco ICS 7750 Can Communicate with the UPS” on page 2-26 .

Verifying That the Cisco ICS 7750 Can Communicate with the UPS

Complete the following steps to verify that the Cisco ICS 7750 can communicate with the UPS:

Step 1 On the PC, choose Start > Run.

Step 2 Open a Telnet session with the SPE running System Manager: telnet IP address 5000

Step 3 Log in as an administrator (userID administrator), and enter your password (the default is changeme).

Step 4 Change to the FMM directory:

cd Program Files\Cisco Systems\ics\FMM

	Cisco ICS 7750 Administration and Troubleshooting Guide
2-26	78-10169-02 Rev. B0

Image 26

Contents Monitoring the System Alarms Alarm NotificationLogging Alarm LevelsHow to Access Log Messages Saving Log Messages to a Syslog Server How to Read Log MessagesHandling Log Messages with ICS System Manager Element Example Format Description StringKeyword Description FacilitiesSeverity Levels Keyword Level Description Syslog DefinitionHow to Change the Log Configuration Configuration Parameters Default Setting Default Log ConfigurationConfiguring the Syslog Daemon on Unix Syslog Servers Task Command Changing Syslog Server LoggingSnmp Basics Snmp ComponentsMajor Components of SNMP-Managed Networks Using Snmp with MIB Variables Snmp Management Information BaseOperation Description Snmp NetworkUnderstanding Traps Supported MIBsUnderstanding Community Strings Cisco ICS 7750 TrapsMonitoring with ICS System Manager Modifying the Base Community StringCiscoWorks2000 Applications Using CiscoWorks2000 for Network ManagementMonitoring with CiscoWorks2000 Snmp and the CiscoWorks2000 Interface Monitoring with Cisco IOS SoftwareEvaluating System Performance Evaluating Traffic Loads In-Band Versus Out-of-Band MonitoringEvaluating Reachability and Response Times Using show Commands Common show CommandsMonitoring a UPS Connecting and Powering Up the UPS ComponentsSearching and Filtering Output of show Commands Through a Serial Connection on Start Programs APC Card Management Wizard Check the Start a Web browser when finished check box Choose Start Run SetUPSHostName -HostName Name Verify that the Cisco ICS 7750 can communicate with the UPS 78-10169-02 Rev. B0