IP Configuration
The IP Configuration screen displays these choices: the IP Address Settings, HTTP, HTTPS Configuration, and Network Configuration of the Ethernet switch.
IP Address Configuration (Layer 2)
The IP information of the Ethernet switch is displayed here.
IP Address | The IP Address of the Ethernet switch is displayed. |
| Verify that the address you enter is correct and does |
| not conflict with another device on the network. |
|
|
Subnet Mask | The subnet mask of the Ethernet switch is displayed. |
|
|
Default Gateway | The IP address of your network’s default gateway is |
| displayed. |
|
|
Management VLAN | The VLAN ID number is displayed. |
|
|
DHCP client | The status of the DHCP client is displayed. If you |
| want the Ethernet switch to be a DHCP client, then |
| select ENABLE. If you want to assign an static IP |
| address to the Ethernet switch, then enter the IP |
| settings and select DISABLE. |
|
|
IP Address Configuration (Layer 3)
The IP information of the Ethernet switch is displayed here.
IP Address | The IP Address of the Ethernet switch is displayed. |
| Verify that the address you enter is correct and does |
| not conflict with another device on the network. |
|
|
Subnet Mask | The subnet mask of the Ethernet switch is displayed. |
|
|
Interface Type | The type of interface. |
|
|
Interface Number | The number of the interface. |
|
|
Linksys One Ready Communications Solution
4
Chapter
24 | Chapter 4: Console Configuration |
| Configuring the Switch through the Console or Telnet Interface |