Linksys SRW224G4, SRW248G4, SRW2048, SRW2024, SRW2016 manual

Page 13

Chapter 2

Product Overview

CONSOLE  The Switch is equipped with a serial port labeled Console (located on the back of the switch) that allows you to connect to a computer’s serial port (for configuration purposes) using the provided serial cable. You can use HyperTerminal to manage the Switch using the console port.

Refer to Chapter 4: Configuration Using the Console Interface for more information.

NOTE: If you need to reset the Switch, unplug the power cord from the back of the Switch. Wait a few seconds and then reconnect it.

SRW224G4

Front Panel

The Switch’s LEDs and ports are located on the front panel.

Front Panel of the SRW224G4

LEDs

POWER  (Green)  Lights up green to indicate that power is being supplied to the Switch.

LINK/ACT (1-24) (Green) Lights up green to indicate a functional 10/100-Mbps network link through the corresponding port (1 through 24) with an attached device. It flashes to indicate that the Switch is actively sending or receiving data over that port.

LINK/ACT (G1-G4) (Green) Lights up green to indicate a functional 10/100-Mbps network link through the corresponding port (G1 through G4) with an attached device. It flashes to indicate that the Switch is actively sending or receiving data over that port..

1000Mbps (G1-G4) (Amber)  Lights up amber to indicate a 1000-Mbps connection on the corresponding port (G1 through G4) with an attached device.

ETHERNET 1-24 The Switch is equipped with 24 auto-sensing, Ethernet network ports, which use RJ-45 connectors. The Fast Ethernet ports support network speeds of 10 Mbps, 100 Mbps, or 1000 Mbps. They can operate in half and full-duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it (10 Mbps, 100 Mbps, or 1000 Mbps), and adjust its speed and duplex accordingly.

ETHERNET G1-G4 The Switch is equipped with 4 auto-sensing Gigabit Ethernet network ports, which use RJ-45 connectors. The Gigabit Ethernet ports support network speeds of 10 Mbps, 100 Mbps, or 1000 Mbps. They can operate in half and full-duplex modes. Auto- sensing technology enables each port to automatically detect the speed of the device connected to it (10 Mbps, 100 Mbps, or 1000 Mbps), and adjust its speed and duplex accordingly.

MiniGBIC (1-2) The miniGBIC (gigabit interface converter) port is a connection point for a miniGBIC expansion module, so the Switch can be uplinked via fiber to another switch. The MiniGBIC port provides a link to a high-speed network segment or individual workstation at speeds of up to 1000 Mbps.

Use the Linksys MGBT1, MGBSX1, or MGBLH1 miniGBIC modules with the Switch. The MGBSX1 and the MGBLH1 require fiber cabling with LC connectors, while the MGBT1 requires a Category 5e Ethernet cable with an RJ-45 connector.

SRW224G4 Shared Port Mapping

miniGBIC Port

Standard Port

 

 

miniGBIC 1

Port G3

miniGBIC 2

Port G4

 

 

Back Panel

The power port is located on the back panel of the Switch.

Back Panel of the SRW224G4

WebView Switches

6

Page 12 Page 14
Image 13
Page 12 Page 14
Contents WebView Switches About This Guide About This GuideIcon Descriptions Online ResourcesTable of Contents Advanced Configuration Security Radius Security TACACS+ Security 802.1x Settings Appendix B Windows Help Appendix D GlossaryAppendix H Software License Agreement Chapter Introduction ChapterIntroduction Product Overview Chapter Product OverviewSRW2048 Product Overview SRW2024SRW2016 SRW248G4 SRW224G4 Refer to Configuration Using Before You Install the Switch Connecting the SwitchPlacement Options OverviewConfiguring the Switch Hardware InstallationConnecting to the Switch through a Telnet Session Chapter Configuration Using Console InterfaceSystem Configuration Menu Switch Main MenuManagement Settings Telnet Configuration Username & Password Settings IP Configuration Http Network Configuration File Management Port StatusHelp Port ConfigurationAdvanced Configuration Chapter Advanced ConfigurationAccessing the Web-based Utility Setup SummaryIP Configuration Setup Network SettingsSystem Information IdentificationSet Time Setup TimeLocal Time Daylight SavingPort Management Port Settings Setup Green EthernetPort Settings Port Configuration Link Aggregation Detail Port Management Link AggregationVlan Management Create Vlan Port Management LacpSingle Vlan Vlan RangeVlan Management Ports to Vlan Vlan Management Port SettingVlan Management Gvrp Vlan Management Vlan to PortsStatistics Rmon Statistics Log Table Statistics Rmon HistoryRmon History Alarm Entry Indicates a specific alarm Statistics Rmon AlarmStatistics Port Utilization Statistics Rmon EventsAdd Event Rmon Events LogStatistics Gvrp Statistics Statistics 802.1x StatisticsACL IP Based ACL ACL MAC Based ACL Security Radius Security ACL BindingSecurity TACACS+ Security 802.1x SettingsSecurity Port Security 802.1x Settings Setting TimerSecurity Multiple Hosts Security Storm Control QoS CoS SettingsQoS QoS Dscp Settings QoS Queue SettingsCoS Default QoS BandwidthQoS Advanced Mode QoS Basic ModeAdvanced Mode Out of Profile Dscp Advanced Mode New Class Map Advanced Mode Policy NameSpanning Tree Spanning Tree STP Status Global SettingSpanning Tree Global STP Bridge Settings Spanning Tree STP Port SettingsSpanning Tree Rstp Port Settings Spanning Tree Mstp Properties Spanning Tree Mstp Instance Settings Multicast Igmp Snooping Multicast Bridge Multicast Forward All Multicast Bridge MulticastSnmp Views Snmp Global ParametersSnmp Group Membership Snmp Group ProfileSnmp Communities Base Table Snmp Notification FilterAdvanced Table Snmp Notification Recipient Admin User AuthenticationAdmin Static Address Admin Jumbo FramesQuery Admin Logging Admin Dynamic AddressAdmin Cable Test Admin Port MirroringAdmin Firmware Upgrade Admin Save ConfigurationBackup Via TftpAdmin Factory Defaults Admin RebootAdmin Server Logs Admin Flash Logs Admin Memory LogsAppendix a About Gigabit Ethernet Fiber Optic Cabling Appendix aGigabit Ethernet Fiber Optic CablingAppendix B Windows Help Appendix BShared Resources Network Neighborhood/My Network PlacesStartup Menu Procedures Appendix C Downloading using XmodemAppendix C Downloading using Xmodem Appendix D Glossary Appendix DGlossary Glossary Smtp Simple Mail Transfer Protocol The standard e Appendix D Specifications Appendix E SpecificationsAppendix E Specifications Environmental Security MAC Address port security† Limited Warranty Warranty InformationObtaining Warranty Service Appendix FTechnical Support Warranty InformationRegulatory Information Appendix GRegulatory Information Appendix G Norsk Norwegian Miljøinformasjon for kunder i EU Appendix G Appendix H Software License Agreement Appendix HSoftware in Linksys Products Software LicensesSoftware License Agreement SchedulePreamble Appendix H END of Terms and Conditions END of Schedule Appendix H END of Schedule 3s Contact Information Appendix
Related manuals
Manual 123 pages 42.48 Kb Manual 3 pages 47.48 Kb Manual 2 pages 1.75 Kb

SRW2016, SRW224G4, SRW2024, SRW2048, SRW248G4 specifications

The Linksys SRW2048 is a robust Layer 2 managed switch that caters to the networking needs of small to medium-sized businesses. Designed with performance and reliability in mind, it provides features that ensure optimal network efficiency and security.

One of the standout features of the SRW2048 is its 48 10/100/1000 Mbps Gigabit Ethernet ports, enabling high-speed data transfer and seamless connectivity for various devices within the network. This makes it ideal for environments with heavy data traffic, ensuring minimal latency and high performance.

The SRW2048 also supports advanced Layer 2 management features, including VLAN (Virtual Local Area Network) support, which allows users to segment the network into smaller, manageable sections. This is crucial for improving security and performance, as it reduces unnecessary traffic and potential broadcast storms. With a VLAN configuration, businesses can group users and devices based on function or department, ensuring efficient communication within teams.

In addition to VLAN capabilities, the Linksys SRW2048 incorporates Quality of Service (QoS) features. This technology prioritizes critical network traffic, such as voice over IP (VoIP) and video conferencing, ensuring that these applications receive the bandwidth they require for optimal performance. This is particularly beneficial for businesses that rely on real-time communication tools.

The switch also enhances security through features such as IEEE 802.1X port security, which ensures that only authorized users can access the network. The SRW2048 supports access control lists (ACLs), allowing administrators to set specific permissions for users and devices, further tightening security.

Linksys has also equipped the SRW2048 with a user-friendly web-based management interface, simplifying the process of configuring and monitoring network performance. This accessible interface allows IT personnel to quickly identify issues, manage traffic, and configure settings without extensive training.

Another notable characteristic of the Linksys SRW2048 is its robust build quality and reliability. With a metal chassis and fanless design, it maintains a low acoustic footprint and ensures passive cooling, making it suitable for office environments.

Overall, the Linksys SRW2048 is a feature-rich managed switch that combines advanced networking technologies, efficient performance, and security features to meet the diverse needs of modern businesses. Its scalability, manageability, and robust construction make it a valuable addition to any network infrastructure.
Top Page Image Contents