Linksys SRW2048, SRW248G4, SRW2024, SRW224G4, SRW2016 manual Port Settings Port Configuration

Page 31

Chapter 5

Advanced Configuration

PVE  When a port is a Private VLAN Edge (PVE) port, it bypasses the Forwarding Database and forwards all unicast, multicast, and broadcast traffic to an uplink. Uplinks can be ports or LAGs.

Detail  The Detail button opens the Port Configuration Detail screen.

Port Settings > Port Configuration

Port Settings > Port Configuration

Port  The port number.

Description  User-defined port description. To modify the description, click Detail.

Port Type  (Read-only) The port’s connection type and speed.

Admin Status  The port’s administrative status. Select either Up or Down to enable or disable traffic forwarding through the port.

Current Port Status  (Read-only) The port’s connection status, either Up or Down.

Reactivate Suspended Port  If the port has been suspended, select this checkbox to reactivate the port.

Operational Status  (Read-only) Displays whether the port is operational or non-operational.

Admin Speed  Use this to manually set the port’s configured transmission rate in Mbps. You can select 10M, 100M, or 1000M (Gigabit ports only). Before you change this setting, make sure that Auto Negotiation is disabled.

Current Port Speed  (Read-only) The port’s current rate in Mbps.

Admin Duplex  The port’s duplex mode (Full or Half).

Current Duplex Mode  (Read-only) The port’s current duplex mode.

Auto Negotiation  Select Enable (default) or Disable to enable or disable Auto-Negotiation on the port. Auto- Negotiation allows a port to advertise its transmission rate, duplex mode, and flow control settings to other ports. If using a small-form-factor pluggable (SFP) module, select Disable.

Current Auto Negotiation  (Read-only) The port’s current Auto-Negotiation status.

Admin Advertisement  Specifies the capabilities to be advertised by the port. Multiple options may be selected or Max Capability can be selected to cover all of the options. The available options are:

•• Max Capability  The port advertises all speeds and duplex mode settings.

•• 10 Half  The port advertises 10 Mbps half-duplex operation.

•• 10 Full  The port advertises 10 Mbps full-duplex operation.

•• 100 Half  The port advertises 100 Mbps half-duplex operation.

•• 100 Full  The port advertises 100 Mbps full-duplex operation.

•• 1000 Full  (Gigabit ports only) The port advertises 1000 Mbps full-duplex operation.

NOTE: The SRW248G4 and SRW224G4 offer only the 1000 option on ports G1-G4.

Current Advertisement  (Read-only) The speed and duplex mode settings that the port is currently advertising.

Neighbor Advertisement  (Read-only) The speed and duplex mode settings that the neighbor port (the port to which the selected port is connected) is advertising. If the port has no neighbor port, this field displays “Unknown.”

Back Pressure  Select Enable or Disable (default) to enable or disable Back Pressure mode on the port.

Current Back Pressure  (Read-only) The current Back Pressure mode on the port.

Flow Control  Select Enable or Disable to manually enable or disable flow control, or select Auto-Negotiationfor automatic selection of flow control on the port.

Current Flow Control  (Read-only) The current flow control setting.

MDI/MDIX  Select the port’s MDI/MDIX type, either MDI, MDIX, or Auto (automatically detect type). The MDI setting is used if the port is connected to an end station. The MDIX setting is used if the port is connected to a hub or another switch.

Current MDI/MDIX  (Read-only) The port’s current MDI/ MDIX type.

WebView Switches

24

Page 30 Page 32
Image 31
Page 30 Page 32
Contents WebView Switches Online Resources About This GuideAbout This Guide Icon DescriptionsTable of Contents Advanced Configuration Security Radius Security TACACS+ Security 802.1x Settings Appendix B Windows Help Appendix D GlossaryAppendix H Software License Agreement Chapter Introduction ChapterIntroduction Product Overview Chapter Product OverviewSRW2048 Product Overview SRW2024SRW2016 SRW248G4 SRW224G4 Refer to Configuration Using Overview Connecting the SwitchBefore You Install the Switch Placement OptionsConfiguring the Switch Hardware InstallationConnecting to the Switch through a Telnet Session Chapter Configuration Using Console InterfaceSystem Configuration Menu Switch Main MenuManagement Settings Telnet Configuration Username & Password Settings IP Configuration Http Network Configuration File Management Port StatusHelp Port ConfigurationSetup Summary Chapter Advanced ConfigurationAdvanced Configuration Accessing the Web-based UtilityIdentification Setup Network SettingsIP Configuration System InformationDaylight Saving Setup TimeSet Time Local TimePort Management Port Settings Setup Green EthernetPort Settings Port Configuration Link Aggregation Detail Port Management Link AggregationVlan Range Port Management LacpVlan Management Create Vlan Single VlanVlan Management Ports to Vlan Vlan Management Port SettingVlan Management Gvrp Vlan Management Vlan to PortsStatistics Rmon Statistics Log Table Statistics Rmon HistoryRmon History Alarm Entry Indicates a specific alarm Statistics Rmon AlarmRmon Events Log Statistics Rmon EventsStatistics Port Utilization Add EventStatistics Gvrp Statistics Statistics 802.1x StatisticsACL IP Based ACL ACL MAC Based ACL Security Radius Security ACL BindingSecurity TACACS+ Security 802.1x SettingsSecurity Port Security 802.1x Settings Setting TimerSecurity Multiple Hosts Security Storm Control QoS CoS SettingsQoS QoS Bandwidth QoS Queue SettingsQoS Dscp Settings CoS DefaultQoS Advanced Mode QoS Basic ModeAdvanced Mode Out of Profile Dscp Advanced Mode New Class Map Advanced Mode Policy NameSpanning Tree Spanning Tree STP Status Global SettingSpanning Tree Global STP Bridge Settings Spanning Tree STP Port SettingsSpanning Tree Rstp Port Settings Spanning Tree Mstp Properties Spanning Tree Mstp Instance Settings Multicast Igmp Snooping Multicast Bridge Multicast Forward All Multicast Bridge MulticastSnmp Views Snmp Global ParametersSnmp Group Membership Snmp Group ProfileSnmp Communities Base Table Snmp Notification FilterAdvanced Table Snmp Notification Recipient Admin User AuthenticationAdmin Static Address Admin Jumbo FramesQuery Admin Logging Admin Dynamic AddressAdmin Cable Test Admin Port MirroringVia Tftp Admin Save ConfigurationAdmin Firmware Upgrade BackupAdmin Factory Defaults Admin RebootAdmin Server Logs Admin Flash Logs Admin Memory LogsFiber Optic Cabling Appendix aAppendix a About Gigabit Ethernet Fiber Optic Cabling Gigabit EthernetNetwork Neighborhood/My Network Places Appendix BAppendix B Windows Help Shared ResourcesStartup Menu Procedures Appendix C Downloading using XmodemAppendix C Downloading using Xmodem Appendix D Glossary Appendix DGlossary Glossary Smtp Simple Mail Transfer Protocol The standard e Appendix D Specifications Appendix E SpecificationsAppendix E Specifications Environmental Security MAC Address port security† Appendix F Warranty InformationLimited Warranty Obtaining Warranty ServiceTechnical Support Warranty InformationRegulatory Information Appendix GRegulatory Information Appendix G Norsk Norwegian Miljøinformasjon for kunder i EU Appendix G Software Licenses Appendix HAppendix H Software License Agreement Software in Linksys ProductsSoftware License Agreement SchedulePreamble Appendix H END of Terms and Conditions END of Schedule Appendix H END of Schedule 3s Contact Information Appendix
Related manuals
Manual 123 pages 42.48 Kb Manual 3 pages 47.48 Kb Manual 2 pages 1.75 Kb

SRW2016, SRW224G4, SRW2024, SRW2048, SRW248G4 specifications

The Linksys SRW2048 is a robust Layer 2 managed switch that caters to the networking needs of small to medium-sized businesses. Designed with performance and reliability in mind, it provides features that ensure optimal network efficiency and security.

One of the standout features of the SRW2048 is its 48 10/100/1000 Mbps Gigabit Ethernet ports, enabling high-speed data transfer and seamless connectivity for various devices within the network. This makes it ideal for environments with heavy data traffic, ensuring minimal latency and high performance.

The SRW2048 also supports advanced Layer 2 management features, including VLAN (Virtual Local Area Network) support, which allows users to segment the network into smaller, manageable sections. This is crucial for improving security and performance, as it reduces unnecessary traffic and potential broadcast storms. With a VLAN configuration, businesses can group users and devices based on function or department, ensuring efficient communication within teams.

In addition to VLAN capabilities, the Linksys SRW2048 incorporates Quality of Service (QoS) features. This technology prioritizes critical network traffic, such as voice over IP (VoIP) and video conferencing, ensuring that these applications receive the bandwidth they require for optimal performance. This is particularly beneficial for businesses that rely on real-time communication tools.

The switch also enhances security through features such as IEEE 802.1X port security, which ensures that only authorized users can access the network. The SRW2048 supports access control lists (ACLs), allowing administrators to set specific permissions for users and devices, further tightening security.

Linksys has also equipped the SRW2048 with a user-friendly web-based management interface, simplifying the process of configuring and monitoring network performance. This accessible interface allows IT personnel to quickly identify issues, manage traffic, and configure settings without extensive training.

Another notable characteristic of the Linksys SRW2048 is its robust build quality and reliability. With a metal chassis and fanless design, it maintains a low acoustic footprint and ensures passive cooling, making it suitable for office environments.

Overall, the Linksys SRW2048 is a feature-rich managed switch that combines advanced networking technologies, efficient performance, and security features to meet the diverse needs of modern businesses. Its scalability, manageability, and robust construction make it a valuable addition to any network infrastructure.
Top Page Image Contents