Linksys SRW2016, SRW248G4, SRW2048 Vlan Management Port Setting, Vlan Management Ports to Vlan

Page 34

Chapter 5

Advanced Configuration

VLAN Management > Port Setting

The VLAN Port Setting screen provides parameters for managing ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Setting screen. All untagged packets arriving to the device are tagged by the ports PVID.

VLAN Management > Port Settings

Port  The port number included in the VLAN. Mode  Indicates the port mode. Possible values are:

•• General  The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode).

•• Access  The port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port (packet type) cannot be designated. It is also not possible to enable or disable ingress filtering on an access port.

•• Trunk  The port belongs to VLANs in which all ports are tagged (except for an optional single native VLAN).

Acceptable Frame Type  Packet type accepted on the port. Possible values are:

•• Admit All  Indicates that both tagged and untagged packets are accepted on the port.

•• Admit Tag Only  Indicates that only tagged packets are accepted on the port.

PVID  Assigns a VLAN ID to untagged packets. The possible values are 2–4094. VLAN 4095 is defined as per standard and industry practice as the discard VLAN. Packets classified to the Discard VLAN are dropped.

Ingress Filtering  Enables or disables Ingress filtering on the port. Ingress filtering discards packets which do not include an ingress port.

LAG  Indicates the LAG to which the VLAN is defined.

VLAN Management > Ports to VLAN

The Ports to VLAN screen contains fields for configuring ports to a VLAN. The port default VLAN ID (PVID) is configured on the Create VLAN screen. All untagged packets arriving to the device are tagged by the ports PVID.

VLAN Management > Ports to VLAN

The Ports to VLAN screen contains a Port Table for VLAN parameters for each port. Ports are assigned VLAN membership by selecting and configuring the presented configuration options.

VLAN  The VLAN number.

Access  Indicates the port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled or disabled on an access port.

Trunk  Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can be untagged.

General  Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode).

Tagged  Defines the interface as a tagged member of a VLAN. All packets forwarded by the interface are tagged. The packets contain VLAN information.

Untagged  Packets forwarded by the interface are untagged.

Forbidden  Forbidden ports are not included in the VLAN.

Exclude  Excludes the interface from the VLAN. However, the interface cannot be added to the VLAN through GVRP.

WebView Switches

27

Page 33 Page 35
Image 34
Page 33 Page 35
Contents WebView Switches Icon Descriptions About This GuideAbout This Guide Online ResourcesTable of Contents Advanced Configuration Security Radius Security TACACS+ Security 802.1x Settings Appendix D Glossary Appendix B Windows HelpAppendix H Software License Agreement Chapter Introduction ChapterIntroduction Product Overview Chapter Product OverviewSRW2048 SRW2024 Product OverviewSRW2016 SRW248G4 SRW224G4 Refer to Configuration Using Placement Options Connecting the SwitchBefore You Install the Switch OverviewHardware Installation Configuring the SwitchChapter Configuration Using Console Interface Connecting to the Switch through a Telnet SessionSwitch Main Menu System Configuration MenuManagement Settings Telnet Configuration Username & Password Settings IP Configuration Http Network Configuration Port Status File ManagementPort Configuration HelpAccessing the Web-based Utility Chapter Advanced ConfigurationAdvanced Configuration Setup SummarySystem Information Setup Network SettingsIP Configuration IdentificationLocal Time Setup TimeSet Time Daylight SavingSetup Green Ethernet Port Management Port SettingsPort Settings Port Configuration Port Management Link Aggregation Link Aggregation DetailSingle Vlan Port Management LacpVlan Management Create Vlan Vlan RangeVlan Management Port Setting Vlan Management Ports to VlanVlan Management Vlan to Ports Vlan Management GvrpStatistics Rmon Statistics Log Table Statistics Rmon HistoryRmon History Statistics Rmon Alarm Alarm Entry Indicates a specific alarmAdd Event Statistics Rmon EventsStatistics Port Utilization Rmon Events LogStatistics 802.1x Statistics Statistics Gvrp StatisticsACL IP Based ACL ACL MAC Based ACL Security ACL Binding Security RadiusSecurity 802.1x Settings Security TACACS+802.1x Settings Setting Timer Security Port SecuritySecurity Multiple Hosts Security Storm Control QoS CoS SettingsQoS CoS Default QoS Queue SettingsQoS Dscp Settings QoS BandwidthQoS Advanced Mode QoS Basic ModeAdvanced Mode Out of Profile Dscp Advanced Mode New Class Map Advanced Mode Policy NameSpanning Tree Spanning Tree STP Status Global SettingSpanning Tree Global STP Spanning Tree STP Port Settings Bridge SettingsSpanning Tree Rstp Port Settings Spanning Tree Mstp Properties Spanning Tree Mstp Instance Settings Multicast Igmp Snooping Multicast Bridge Multicast Multicast Bridge Multicast Forward AllSnmp Global Parameters Snmp ViewsSnmp Group Profile Snmp Group MembershipSnmp Communities Base Table Snmp Notification FilterAdvanced Table Admin User Authentication Snmp Notification RecipientAdmin Static Address Admin Jumbo FramesQuery Admin Dynamic Address Admin LoggingAdmin Port Mirroring Admin Cable TestBackup Admin Save ConfigurationAdmin Firmware Upgrade Via TftpAdmin Factory Defaults Admin RebootAdmin Server Logs Admin Memory Logs Admin Flash LogsGigabit Ethernet Appendix aAppendix a About Gigabit Ethernet Fiber Optic Cabling Fiber Optic CablingShared Resources Appendix BAppendix B Windows Help Network Neighborhood/My Network PlacesStartup Menu Procedures Appendix C Downloading using XmodemAppendix C Downloading using Xmodem Appendix D Glossary Appendix DGlossary Glossary Smtp Simple Mail Transfer Protocol The standard e Appendix D Specifications Appendix E SpecificationsAppendix E Specifications Environmental Security MAC Address port security† Obtaining Warranty Service Warranty InformationLimited Warranty Appendix FWarranty Information Technical SupportAppendix G Regulatory InformationRegulatory Information Appendix G Norsk Norwegian Miljøinformasjon for kunder i EU Appendix G Software in Linksys Products Appendix HAppendix H Software License Agreement Software LicensesSchedule Software License AgreementPreamble Appendix H END of Terms and Conditions END of Schedule Appendix H END of Schedule 3s Appendix Contact Information
Related manuals
Manual 123 pages 42.48 Kb Manual 3 pages 47.48 Kb Manual 2 pages 1.75 Kb

SRW2016, SRW224G4, SRW2024, SRW2048, SRW248G4 specifications

The Linksys SRW2048 is a robust Layer 2 managed switch that caters to the networking needs of small to medium-sized businesses. Designed with performance and reliability in mind, it provides features that ensure optimal network efficiency and security.

One of the standout features of the SRW2048 is its 48 10/100/1000 Mbps Gigabit Ethernet ports, enabling high-speed data transfer and seamless connectivity for various devices within the network. This makes it ideal for environments with heavy data traffic, ensuring minimal latency and high performance.

The SRW2048 also supports advanced Layer 2 management features, including VLAN (Virtual Local Area Network) support, which allows users to segment the network into smaller, manageable sections. This is crucial for improving security and performance, as it reduces unnecessary traffic and potential broadcast storms. With a VLAN configuration, businesses can group users and devices based on function or department, ensuring efficient communication within teams.

In addition to VLAN capabilities, the Linksys SRW2048 incorporates Quality of Service (QoS) features. This technology prioritizes critical network traffic, such as voice over IP (VoIP) and video conferencing, ensuring that these applications receive the bandwidth they require for optimal performance. This is particularly beneficial for businesses that rely on real-time communication tools.

The switch also enhances security through features such as IEEE 802.1X port security, which ensures that only authorized users can access the network. The SRW2048 supports access control lists (ACLs), allowing administrators to set specific permissions for users and devices, further tightening security.

Linksys has also equipped the SRW2048 with a user-friendly web-based management interface, simplifying the process of configuring and monitoring network performance. This accessible interface allows IT personnel to quickly identify issues, manage traffic, and configure settings without extensive training.

Another notable characteristic of the Linksys SRW2048 is its robust build quality and reliability. With a metal chassis and fanless design, it maintains a low acoustic footprint and ensures passive cooling, making it suitable for office environments.

Overall, the Linksys SRW2048 is a feature-rich managed switch that combines advanced networking technologies, efficient performance, and security features to meet the diverse needs of modern businesses. Its scalability, manageability, and robust construction make it a valuable addition to any network infrastructure.
Top Page Image Contents