Linksys SRW2024, SRW248G4, SRW2048, SRW224G4 manual Spanning Tree STP Port Settings, Bridge Settings

Page 52

Chapter 5

Advanced Configuration

Path Cost Default Values  Specifies the method used to assign default path costs to STP ports. The possible field values are:

•• Short  Specifies a 1–65,535range for port path costs. This is the default value.

•• Long  Specifies a 1–200,000,000range for port path costs. The default path costs assigned to an interface varies according to the selected method.

Bridge Settings

Priority  Specifies the bridge priority value.When switches or bridges are running STP, each is assigned a priority. After exchanging BPDUs, the device with the lowest priority value becomes the Root Bridge. The default value is 32,768. The port priority value is provided in increments of 4096. For example, 4096, 8192, 12,288, and so on. The range is 0–65,535.

Hello Time  Specifies the device Hello Time. The Hello Time indicates the amount of time in seconds a root bridge waits between configuration messages. The default is 2 seconds. The range is 1–10seconds.

Max Age  Specifies the device Maximum Age Time. The Maximum Age Time indicates the amount of time in seconds a bridge waits before sending configuration messages. The default max age is 20 seconds. The range is 6–40seconds.

Forward Delay  Specifies the device forward delay time. The Forward Delay Time indicates the amount of time in seconds a bridge remains in a listening and learning state before forwarding packets. The default is 15 seconds. The range is 4–30seconds.

Spanning Tree > STP Port Settings

Network administrators can assign STP settings to specific interfaces using the STP Interface Settings screen.

Spanning Tree > STP Port Settings

The STP Interface Settings page contains the following fields:

Interface  Indicates the port or LAG on which STP is enabled.

STP  Indicates if STP is enabled on the port.

Port Fast  Indicates if Fast Link is enabled on the port. If Fast Link mode is enabled for a port, the Port State is automatically placed in the Forwarding state when the port link is up. Fast Link optimizes the STP protocol convergence. STP convergence can take 30–60seconds in large networks.

Port State  Displays the current STP state of a port. If enabled, the port state determines what forwarding action is taken on traffic. Possible port states are:

•• Disabled  Indicates that STP is currently disabled on the port. The port forwards traffic while learning MAC addresses.

•• Blocking  Indicates that the port is currently blocked and cannot forward traffic or learn MAC addresses. Blocking is displayed when Classic STP is enabled.

•• Listening  Indicates that the port is in Listening mode. The port cannot forward traffic nor can it learn MAC addresses.

•• Learning  Indicates that the port is in Learning mode. The port cannot forward traffic, however it can learn new MAC addresses.

•• Forwarding  Indicates that the port is in Forwarding mode. The port can forward traffic and learn new MAC addresses.

Speed  Indicates the speed at which the port is operating.

WebView Switches

45

Image 52
Contents WebView Switches About This Guide About This GuideIcon Descriptions Online ResourcesTable of Contents Advanced Configuration Security Radius Security TACACS+ Security 802.1x Settings Appendix D Glossary Appendix B Windows HelpAppendix H Software License Agreement Chapter Introduction ChapterIntroduction Product Overview Chapter Product OverviewSRW2048 SRW2024 Product OverviewSRW2016 SRW248G4 SRW224G4 Refer to Configuration Using Connecting the Switch Before You Install the SwitchPlacement Options OverviewHardware Installation Configuring the SwitchChapter Configuration Using Console Interface Connecting to the Switch through a Telnet SessionSwitch Main Menu System Configuration MenuManagement Settings Telnet Configuration Username & Password Settings IP Configuration Http Network Configuration Port Status File ManagementPort Configuration HelpChapter Advanced Configuration Advanced ConfigurationAccessing the Web-based Utility Setup SummarySetup Network Settings IP ConfigurationSystem Information IdentificationSetup Time Set TimeLocal Time Daylight SavingSetup Green Ethernet Port Management Port SettingsPort Settings Port Configuration Port Management Link Aggregation Link Aggregation DetailPort Management Lacp Vlan Management Create VlanSingle Vlan Vlan RangeVlan Management Port Setting Vlan Management Ports to VlanVlan Management Vlan to Ports Vlan Management GvrpStatistics Rmon Statistics Log Table Statistics Rmon HistoryRmon History Statistics Rmon Alarm Alarm Entry Indicates a specific alarmStatistics Rmon Events Statistics Port UtilizationAdd Event Rmon Events LogStatistics 802.1x Statistics Statistics Gvrp StatisticsACL IP Based ACL ACL MAC Based ACL Security ACL Binding Security RadiusSecurity 802.1x Settings Security TACACS+802.1x Settings Setting Timer Security Port SecuritySecurity Multiple Hosts Security Storm Control QoS CoS SettingsQoS QoS Queue Settings QoS Dscp SettingsCoS Default QoS BandwidthQoS Advanced Mode QoS Basic ModeAdvanced Mode Out of Profile Dscp Advanced Mode New Class Map Advanced Mode Policy NameSpanning Tree Spanning Tree STP Status Global SettingSpanning Tree Global STP Spanning Tree STP Port Settings Bridge SettingsSpanning Tree Rstp Port Settings Spanning Tree Mstp Properties Spanning Tree Mstp Instance Settings Multicast Igmp Snooping Multicast Bridge Multicast Multicast Bridge Multicast Forward AllSnmp Global Parameters Snmp ViewsSnmp Group Profile Snmp Group MembershipSnmp Communities Base Table Snmp Notification FilterAdvanced Table Admin User Authentication Snmp Notification RecipientAdmin Static Address Admin Jumbo FramesQuery Admin Dynamic Address Admin LoggingAdmin Port Mirroring Admin Cable TestAdmin Save Configuration Admin Firmware UpgradeBackup Via TftpAdmin Factory Defaults Admin RebootAdmin Server Logs Admin Memory Logs Admin Flash LogsAppendix a Appendix a About Gigabit Ethernet Fiber Optic CablingGigabit Ethernet Fiber Optic CablingAppendix B Appendix B Windows HelpShared Resources Network Neighborhood/My Network PlacesStartup Menu Procedures Appendix C Downloading using XmodemAppendix C Downloading using Xmodem Appendix D Glossary Appendix DGlossary Glossary Smtp Simple Mail Transfer Protocol The standard e Appendix D Specifications Appendix E SpecificationsAppendix E Specifications Environmental Security MAC Address port security† Warranty Information Limited WarrantyObtaining Warranty Service Appendix FWarranty Information Technical SupportAppendix G Regulatory InformationRegulatory Information Appendix G Norsk Norwegian Miljøinformasjon for kunder i EU Appendix G Appendix H Appendix H Software License AgreementSoftware in Linksys Products Software LicensesSchedule Software License AgreementPreamble Appendix H END of Terms and Conditions END of Schedule Appendix H END of Schedule 3s Appendix Contact Information
Related manuals
Manual 123 pages 42.48 Kb Manual 3 pages 47.48 Kb Manual 2 pages 1.75 Kb

SRW2016, SRW224G4, SRW2024, SRW2048, SRW248G4 specifications

The Linksys SRW2048 is a robust Layer 2 managed switch that caters to the networking needs of small to medium-sized businesses. Designed with performance and reliability in mind, it provides features that ensure optimal network efficiency and security.

One of the standout features of the SRW2048 is its 48 10/100/1000 Mbps Gigabit Ethernet ports, enabling high-speed data transfer and seamless connectivity for various devices within the network. This makes it ideal for environments with heavy data traffic, ensuring minimal latency and high performance.

The SRW2048 also supports advanced Layer 2 management features, including VLAN (Virtual Local Area Network) support, which allows users to segment the network into smaller, manageable sections. This is crucial for improving security and performance, as it reduces unnecessary traffic and potential broadcast storms. With a VLAN configuration, businesses can group users and devices based on function or department, ensuring efficient communication within teams.

In addition to VLAN capabilities, the Linksys SRW2048 incorporates Quality of Service (QoS) features. This technology prioritizes critical network traffic, such as voice over IP (VoIP) and video conferencing, ensuring that these applications receive the bandwidth they require for optimal performance. This is particularly beneficial for businesses that rely on real-time communication tools.

The switch also enhances security through features such as IEEE 802.1X port security, which ensures that only authorized users can access the network. The SRW2048 supports access control lists (ACLs), allowing administrators to set specific permissions for users and devices, further tightening security.

Linksys has also equipped the SRW2048 with a user-friendly web-based management interface, simplifying the process of configuring and monitoring network performance. This accessible interface allows IT personnel to quickly identify issues, manage traffic, and configure settings without extensive training.

Another notable characteristic of the Linksys SRW2048 is its robust build quality and reliability. With a metal chassis and fanless design, it maintains a low acoustic footprint and ensures passive cooling, making it suitable for office environments.

Overall, the Linksys SRW2048 is a feature-rich managed switch that combines advanced networking technologies, efficient performance, and security features to meet the diverse needs of modern businesses. Its scalability, manageability, and robust construction make it a valuable addition to any network infrastructure.