Chapter 4
Chapter 4:
Configuration Using the
Console Interface
Overview
The Switch features a
Configuring the HyperTerminal Application
Before using the console interface, configure the HyperTerminal application on your PC as follows:
1.Click the Start button.
2.Select Programs > Accessories > Communications > HyperTerminal.
Start > Programs > Accessories > Communications > HyperTerminal
3.Enter a name for this connection. In this example, the name of connection is SRW2048. Select an icon for the application, then click OK.
HyperTerminal Connection Description Screen
WebView Switches
Configuration Using the Console Interface
4.Select a port to communicate with the Switch: COM1, COM2, or TCP/IP.
HyperTerminal Connect To Screen
5.Set the serial port settings as follows: Bits per second: 38,400
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
6.Click OK.
HyperTerminal Properties Screen
Connecting to the Switch through a Telnet Session
Open a
The Login screen appears. The first time you open the
10