Linksys SRW2048, SRW248G4 manual Spanning Tree STP Status, Spanning Tree Global STP, Global Setting

Page 51

Chapter 5

Advanced Configuration

Spanning Tree > STP Status

The STP Status screen describes the STP status on the device.

Spanning Tree > STP Status

Spanning Tree State  Indicates if STP is enabled on the device.

Spanning Tree Mode  Indicates the STP mode by which STP is enabled on the device.

Bridge ID  Identifies the Bridge priority and MAC address.

Designated Root  Indicates the ID of the bridge with the lowest path cost to the instance ID.

Root Port  Indicates the port number that offers the lowest cost path from this bridge to the Root Bridge. It is significant when the Bridge is not the Root. The default is 0.

Root Path Cost  The cost of the path from this bridge to the root.

Root Maximum Age (sec)  Indicates the device Maximum Age Time. The Maximum Age Time indicates the amount of time in seconds a bridge waits before sending configuration messages. The default max age is 20 seconds. The range is 6–40seconds.

Root Hello Time (sec)  Indicates the device Hello Time. The Hello Time indicates the amount of time in seconds a root bridge waits between configuration messages. The default is 2 seconds. The range is 1–10seconds.

Root Forward delay (sec)  Indicates the device forward delay time. The Forward Delay Time indicates the amount of time in seconds a bridge remains in a listening and learning state before forwarding packets. The default is 15 seconds. The range is 4–30seconds.

Topology Changes Counts  Indicates the total amount of STP state changes that have occurred.

Last Topology Change  Indicates the amount of time that has elapsed since the bridge was initialized or reset, and the last topographic change occurred. The time is displayed in a day hour minute second format, for example, 2 days 5 hours 10 minutes and 4 seconds.

Spanning Tree > Global STP

The Global STP screen contains parameters for enabling STP on the device.

Spanning Tree > Global STP

Global Setting

Spanning Tree State  Indicates if STP is enabled on the device.

STP Operation Mode  Indicates the STP mode by which STP is enabled on the device. The possible field values are:

•• Classic STP  Enables Classic STP on the device. This is the default value.

•• Rapid STP  Enables Rapid STP on the device.

•• Multiple STP  Enables Multiple STP on the device.

BPDU Handling  Determines how BPDU packets are managed when STP is disabled on the port/device. BPDUs are used to transmit spanning tree information. The possible field values are:

•• Filtering  Filters BPDU packets when spanning tree is disabled on an interface. This is the default value.

•• Flooding  Floods BPDU packets when spanning tree is disabled on an interface.

WebView Switches

44

Image 51
Contents WebView Switches Online Resources About This GuideAbout This Guide Icon DescriptionsTable of Contents Advanced Configuration Security Radius Security TACACS+ Security 802.1x Settings Appendix B Windows Help Appendix D GlossaryAppendix H Software License Agreement Chapter Chapter IntroductionIntroduction Chapter Product Overview Product OverviewSRW2048 Product Overview SRW2024SRW2016 SRW248G4 SRW224G4 Refer to Configuration Using Overview Connecting the SwitchBefore You Install the Switch Placement OptionsConfiguring the Switch Hardware InstallationConnecting to the Switch through a Telnet Session Chapter Configuration Using Console InterfaceSystem Configuration Menu Switch Main MenuManagement Settings Telnet Configuration Username & Password Settings IP Configuration Http Network Configuration File Management Port StatusHelp Port ConfigurationSetup Summary Chapter Advanced ConfigurationAdvanced Configuration Accessing the Web-based UtilityIdentification Setup Network SettingsIP Configuration System InformationDaylight Saving Setup TimeSet Time Local TimePort Management Port Settings Setup Green EthernetPort Settings Port Configuration Link Aggregation Detail Port Management Link AggregationVlan Range Port Management LacpVlan Management Create Vlan Single VlanVlan Management Ports to Vlan Vlan Management Port SettingVlan Management Gvrp Vlan Management Vlan to PortsStatistics Rmon Statistics Statistics Rmon History Log TableRmon History Alarm Entry Indicates a specific alarm Statistics Rmon AlarmRmon Events Log Statistics Rmon EventsStatistics Port Utilization Add EventStatistics Gvrp Statistics Statistics 802.1x StatisticsACL IP Based ACL ACL MAC Based ACL Security Radius Security ACL BindingSecurity TACACS+ Security 802.1x SettingsSecurity Port Security 802.1x Settings Setting TimerSecurity Multiple Hosts QoS CoS Settings Security Storm ControlQoS QoS Bandwidth QoS Queue SettingsQoS Dscp Settings CoS DefaultQoS Basic Mode QoS Advanced ModeAdvanced Mode Out of Profile Dscp Advanced Mode Policy Name Advanced Mode New Class MapSpanning Tree Global Setting Spanning Tree STP StatusSpanning Tree Global STP Bridge Settings Spanning Tree STP Port SettingsSpanning Tree Rstp Port Settings Spanning Tree Mstp Properties Spanning Tree Mstp Instance Settings Multicast Igmp Snooping Multicast Bridge Multicast Forward All Multicast Bridge MulticastSnmp Views Snmp Global ParametersSnmp Group Membership Snmp Group ProfileSnmp Communities Snmp Notification Filter Base TableAdvanced Table Snmp Notification Recipient Admin User AuthenticationAdmin Jumbo Frames Admin Static AddressQuery Admin Logging Admin Dynamic AddressAdmin Cable Test Admin Port MirroringVia Tftp Admin Save ConfigurationAdmin Firmware Upgrade BackupAdmin Reboot Admin Factory DefaultsAdmin Server Logs Admin Flash Logs Admin Memory LogsFiber Optic Cabling Appendix aAppendix a About Gigabit Ethernet Fiber Optic Cabling Gigabit EthernetNetwork Neighborhood/My Network Places Appendix BAppendix B Windows Help Shared ResourcesAppendix C Downloading using Xmodem Startup Menu ProceduresAppendix C Downloading using Xmodem Appendix D Appendix D GlossaryGlossary Glossary Smtp Simple Mail Transfer Protocol The standard e Appendix D Appendix E Specifications SpecificationsAppendix E Specifications Environmental Security MAC Address port security† Appendix F Warranty InformationLimited Warranty Obtaining Warranty ServiceTechnical Support Warranty InformationRegulatory Information Appendix GRegulatory Information Appendix G Norsk Norwegian Miljøinformasjon for kunder i EU Appendix G Software Licenses Appendix HAppendix H Software License Agreement Software in Linksys ProductsSoftware License Agreement SchedulePreamble Appendix H END of Terms and Conditions END of Schedule Appendix H END of Schedule 3s Contact Information Appendix
Related manuals
Manual 123 pages 42.48 Kb Manual 3 pages 47.48 Kb Manual 2 pages 1.75 Kb

SRW2016, SRW224G4, SRW2024, SRW2048, SRW248G4 specifications

The Linksys SRW2048 is a robust Layer 2 managed switch that caters to the networking needs of small to medium-sized businesses. Designed with performance and reliability in mind, it provides features that ensure optimal network efficiency and security.

One of the standout features of the SRW2048 is its 48 10/100/1000 Mbps Gigabit Ethernet ports, enabling high-speed data transfer and seamless connectivity for various devices within the network. This makes it ideal for environments with heavy data traffic, ensuring minimal latency and high performance.

The SRW2048 also supports advanced Layer 2 management features, including VLAN (Virtual Local Area Network) support, which allows users to segment the network into smaller, manageable sections. This is crucial for improving security and performance, as it reduces unnecessary traffic and potential broadcast storms. With a VLAN configuration, businesses can group users and devices based on function or department, ensuring efficient communication within teams.

In addition to VLAN capabilities, the Linksys SRW2048 incorporates Quality of Service (QoS) features. This technology prioritizes critical network traffic, such as voice over IP (VoIP) and video conferencing, ensuring that these applications receive the bandwidth they require for optimal performance. This is particularly beneficial for businesses that rely on real-time communication tools.

The switch also enhances security through features such as IEEE 802.1X port security, which ensures that only authorized users can access the network. The SRW2048 supports access control lists (ACLs), allowing administrators to set specific permissions for users and devices, further tightening security.

Linksys has also equipped the SRW2048 with a user-friendly web-based management interface, simplifying the process of configuring and monitoring network performance. This accessible interface allows IT personnel to quickly identify issues, manage traffic, and configure settings without extensive training.

Another notable characteristic of the Linksys SRW2048 is its robust build quality and reliability. With a metal chassis and fanless design, it maintains a low acoustic footprint and ensures passive cooling, making it suitable for office environments.

Overall, the Linksys SRW2048 is a feature-rich managed switch that combines advanced networking technologies, efficient performance, and security features to meet the diverse needs of modern businesses. Its scalability, manageability, and robust construction make it a valuable addition to any network infrastructure.