Linksys SLM248G4S (G5), SLM224G4S (G5) manual Snmp Communities

Page 46

Chapter 5

Configuration Using the Web-based Utility

Authentication Method  Use this to enable or disable Authentication between the SNMP Agent on the Switch and the SNMP Manager.

•None  Disables authentication between the SNMP Agent on the Switch and the SNMP Manager.

•MD5 Password  Enables authentication using HMAC- MD5-96 password authentication.

•SHA Password  Enables authentication using HMAC- SHA-96 password authentication.

•MD5 Key  Enables authentication using the HMAC- MD5 algorithm.

•SHA Key  Enables authentication using HMAC-SHA-96 authentication.

Password  Defines the local user password. Local user passwords can contain up to 159 characters.

Authentication Key  Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. The authentication and privacy keys are entered to define the authentication key. If only authentication is required, 16 bytes are defined. If both privacy and authentication are required, 32 bytes are defined. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or a colon.

Privacy Key  Defines the Privacy Key (LSB). If only authentication is required, 20 bytes are defined. If both privacy and authentication are required, 36 bytes are defined. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a period or colon.

Click Add to List to add the Group Membership configuration to the respective table at the bottom of the screen.

SNMP > Communities

The Communities screen is used to define SNMP communities. The Communities screen contains the following three areas: Communities, Basic Table and Advanced Table.

SNMP > Communities

SNMP Management Station  Defines the management stationIPaddressforwhichtheadvancedSNMPcommunity is defined. There are two definition options: either select the first radio button and enter the management station IP address in the field (default), or select All to include all management station IP addresses.

Community String  Defines the password used to authenticate the management station to the device.

Basic  Enables SNMP Basic mode for a selected community and contains the following fields:

Access Mode  Defines the access rights of the community. The possible field values are:

•Read Only  Management access is restricted to read- only, and changes cannot be made to the community.

•Read Write  Management access is read-write and changes can be made to the device configuration, but not to the community.

•SNMP Admin  User can access all device configuration options, and can modify the community.

View Name  Contains a list of user-defined SNMP views.

Advanced  Enables SNMP Advanced mode for a selected community and contains the following fields:

Group Name  Defines advanced SNMP communities group names.

Click Add to List to add the Communities configuration to the respective Table at the bottom of the screen.

24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs

40

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Port or 48-Port 10/100 + Icon Descriptions About This GuideAbout This Guide Online ResourcesTable of Contents Snmp Appendix C Glossary Appendix B About Switch StackingGigabit Ethernet Fiber Optic Cabling Appendix F Regulatory Information Appendix D SpecificationsAppendix E Warranty Information Appendix G Contact InformationChapter IntroductionFront Panel Chapter Product OverviewProduct Overview Back PanelSLM248G4S Pre-Installation Considerations Chapter InstallationInstallation Placement OptionsDesktop Placement Hardware InstallationRack-Mount Placement Uplinking the Switch Configuring Stacking ModeConnect port G1 on Unit 2 to port G2 on Unit Replacing a Stacked SwitchConnect port G1 on Unit 3 to port G2 on Unit Using telnet Chapter Configuration Using Console InterfaceUsing the HyperTerminal Application Login screen appears. Proceed to the Login section belowSwitch Main Menu How to Use the Console InterfaceLogin System Configuration MenuUser & Password Settings Management SettingsSystem Information Security Settings IP ConfigurationNetwork Configuration File ManagementReboot System Restore System Default SettingsStack Configuration Port Status Port ConfigurationSystem Mode HelpSetup Summary Chapter Configuration Using Web-based UtilitySetup Device InformationDefault Gateway The IP address default 0.0.0.0 Setup ZoomSetup Network Settings DNS Server The IP address of your ISP’s server thatLocal Time Setup TimeIdentification Daylight SavingPort Management Setup Stack ManagementPort Management Port Settings Sntp ServersPort Configuration LAG Configuration Port Management Link AggregationGlobal Parameter Lacp screen contains fields for configuring Lacp LAGsPort Management Lacp Port PriorityVlan Management Create Vlan Vlan Management Port SettingsVlan Management Lacp Port TableVlan Management Vlan to Port Vlan Management Port to VlanJoin Vlan to Port Statistics Statistics Rmon StatisticsLog Table Statistics Rmon HistoryRmon History Rmon History TableStatistics Rmon Alarms Add AlarmStatistics Rmon Events Statistics Port UtilizationStatistics Interface Statistics Interface Security 802.1x SettingsSecurity Ethernet-likeSetting Timer Security Port SecuritySecurity Management Access List Web IP FilteringSecurity Radius Security Storm ControlBroadcast Only Counts only Broadcast traffic CoS Default QoS CoS SettingsCoS Settings CoS Settings screen is used to enable or disable CoSQoS Dscp Settings QoS Queue SettingsQoS Bandwidth Spanning Tree QoS Basic ModeSpanning Tree STP Status Bridge Settings Spanning Tree STP Port SettingsGlobal Setting Spanning Tree Global STPMulticast Igmp Snooping Vlan Igmp SettingsMulticast Igmp GlobalMulticast Bridge Multicast Multicast Bridge Multicast Forward AllSnmp Global Parameters Snmp ViewsSnmp Group Membership Snmp Group ProfileUser Name Provides a user-defined local user list Snmp Communities Base Table Snmp Notification FilterSnmp Notification Recipient Advanced TableUser Authentication AdminAdmin User Authentication Local User EditSecure The entry is defined for locked ports Admin Static AddressAdmin Dynamic Address Clear Table If selected, this clears the MAC Address tableAdmin Cable Test Admin Port MirroringQuery Admin Save Configuration Admin Reboot Admin Firmware UpgradeAdmin Factory Default Admin Server Logs Admin LoggingAdmin Memory Logs Admin Flash Logs LogoutGigabit Ethernet Appendix aAppendix a About Gigabit Ethernet Fiber Optic Cabling Fiber Optic CablingAppendix B Appendix B About Switch StackingAbout Switch Stacking Stack Building Quick StartUnit IDs Advanced StackingStack Resiliency Unit ID AllocationMaster Discovery Stack Units Startup ProcessMaster Election Stacking Examples Unit and Port ConfigurationUser Controls Replacing a Failed Stack Member in a Running StackStack Master Failure and Replacement Subgroup Contains Both Master Unit and Backup Master Unit Splitting a StackMerging Two Stacks Both Stacks Kept Running During InsertionStacking Cable Failure Inserting Too Many UnitsAppendix C Glossary Appendix CGlossary Glossary Packet a unit of data sent over a network Mail protocol on the InternetAppendix C Specifications Appendix D SpecificationsAppendix D 802.3 10BASE-T Ethernet DimensionsUnit Weight SLM224G4S 1,927 kg 802.3z Gigabit EthernetObtaining Warranty Service Warranty InformationLimited Warranty Appendix EWarranty Information Technical SupportAppendix F Regulatory InformationRegulatory Information Appendix F Norsk Norwegian Miljøinformasjon for kunder i EU Appendix F Appendix G Contact Information8012510A-AI
Top Page Image Contents