Chapter 5 | Configuration Using the |
Acceptable Frame Type This specifies the type of frames that the port will accept. If All (default) is selected, the port will accept all frame types, including tagged or untagged frames. If Tagged is selected, the port accepts only tagged frames. When set to All, each untagged frame received is assigned to the specific VLAN that matches the PVID.
PVID Use this field to select the VLAN ID that will be assigned to untagged frames received on the port. Valid IDs are 1 (default) to 4093. VLAN 4094 is reserved for internal use. VLAN 4095 is defined per standard and industry practice as the Discard VLAN. Frames tagged for the Discard VLAN are dropped.
Ingress Filtering Enables or disables Ingress filtering on the port. Ingress filtering discards packets that do not match port ingress rules. The default is Enabled.
LAG Displays the LAG, if any, to which the port belongs. A port’s LAG settings override the VLAN port settings.
Click Save Changes to save your changes, or click Cancel Changes to cancel.
VLAN Management > Port to VLAN
You use the Port to VLAN screen to add ports to a VLAN and delete ports from a VLAN. When you add a port to a VLAN, you also specify whether the port is tagged or untagged.
The Port to VLAN screen contains a Port Table with VLAN parameters for each port. To add a port to or delete a port from the VLAN, you select the port’s appropriate configuration options from this table.
VLAN Management > Port to VLAN
Select VLAN Select the ID of the VLAN whose port membership you are configuring.
Unit No. Select the unit that contains the ports for the VLAN you are configuring.
For each port in the VLAN, select the appropriate configuration option:
•Tagged The interface is a member of the VLAN. All packets transmitted by the port will be tagged and will carry VLAN information.
•Untagged The interface is a member of the VLAN. All packets transmitted by the port will be untagged and will not carry VLAN information.
•Excluded The interface is excluded from the VLAN. This is the default option.
VLAN Management > VLAN to Port
The VLAN to Port screen displays each port’s VLAN membership information. It is also used to add a port to or delete a port from a VLAN.
Unit No. The unit number that contains the ports whose VLAN information you wish to configure.
Port The number of the port being configured.
Join VLAN To configure the port’s VLAN membership, press Join VLAN to bring up the Join VLAN to Port screen.
VLANs Displays the IDs of the VLANs to which the port belongs. Each VLAN ID ends with “T” if the port is tagged or with “U” if the port is untagged in that VLAN.
LAG Displays the LAG to which the port belongs, if any. If a port belongs to a LAG, it cannot belong to a VLAN. However, the LAG to which the port belongs can be configured to belong to a VLAN.
VLAN Management > VLAN to Port
Join VLAN to Port
The Join VLAN to Port screen appears when you click Join VLAN in the VLAN to Port screen. You use this screen to configure the port’s VLAN membership.
23 |