Advantech RMD-1150 user manual Function key F2, Function key F3

Page 18

1.5.3 Function key <F2>

To switch the eye mark " of a computer on or off. First, use the <UP> and <DOWN> arrow keys to highlight it, then press <F2> to switch its eye mark on or off. If Scan Type is 'Ready PC +"', only the power-on and eye mark selected computers will be displayed sequentially in Scan mode.

1.5.4 Function key <F3>

To lock a device (a computer or a Slave) from unauthorized access, use Security. Security is effective for only one device (a computer or a Slave). To lock a device, use the <UP> and <DOWN> arrow keys to highlight it, then press <F3>. Now, enter up to 4 characters ('A'~'Z', '0'~'9, '-') followed by <ENTER> as new password. A Security-enabled device is marked with a “lock symbol” following its channel number. To permanently disable the security function from a locked device, highlight it, press <F3> then enter the password.

If you want to access the locked device temporarily, simply highlight it and press <ENTER>, the OSD will ask you for the password. After entering correct password, you are allowed to use the device. This device is automatically re-locked once you switch to another one. During Scan mode, OSD skips the security-enabled device.

Note: Only one device (a computer or a Slave) can be locked by this function at a time.

Note!: If you forget the password, the only way to permanently disable the security function is to remove all possible power sources from the RMD-1150F-8. You will need to turn off all computers and unplug the RMD switch power adapters, then restart everything.

RMD-1150 Series User's Manual

1 8

Image 18
Contents Page Copyright notice Acknowledgements Advantech customer services Message to the CustomerTechnical support Safety Instructions, disclaimer, and warranty Page Page Introduction Automatic Mouse Conversion Two-Console 15.0 TFT LCD display SwitchOn-Screen Display OSD Menu High Video QualityFeatures Extra Features for On screen display for KVM switchMore features for multi-access Configurations Single RMD Switch ConfigurationThroughout this manual, RMD-1150F-8 is Installation External Device ConnectionPC with PS/2 mouse Initial Power-Up Operation OSD On-Screen-Display Operation For KVM Switch IntroductionFunction key F1 Function key F2 Function key F3Manual Scan Function key F4Auto Scan Audio StickKeyboard Speed Scan TypeScan Rate Hotkey MenuHot-key commands 6 ESCPosition Left Ctrl + left Ctrl + F3 OSD On-Screen-Display Operation For LCD Monitor Key DefinitionLCD Power MenuBrightness OSD Exit for maintenance use XIICascaded Configuration GeneralChange Configuration while Running OperationFor system check by OSD Cleaning the Monitor DisclaimerTroubleshooting Symtoms Possible causes Solutions Symtoms Possible causes Solutions Condition Checkpoint Resolution Compatible modesResolution Modes Mode Resolution Freq.KHz Freq.HzLimited Warranty Page TechNote