Advantech RMD-1150 user manual Menu, LCD Power

Page 24

4. POWER STAND-BY MODE LED:

Show LCD system in the power stand-by model.

5. Power on LED:

Show LCD system in the power on model.

The Control Key Description

1.MENU:	Press any key to MENU
2. DOWN:	Move to the next item
3. UP :	Move to the previous item
4. + :	Increment control
5. - :	Decrement control
6. LCD POWER :	Power Switch
7. -/+SIMULTANEOUSLY:	Hot Key for Auto Adjusting

Figure 1-6: LCD monitor portion OSD screen illustration

RMD-1150 Series User's Manual

2 4

Image 24

Contents Page Copyright notice Acknowledgements Advantech customer services Message to the CustomerTechnical support Safety Instructions, disclaimer, and warranty Page Page Introduction Two-Console 15.0 TFT LCD display Switch On-Screen Display OSD MenuAutomatic Mouse Conversion High Video QualityFeatures Extra Features for On screen display for KVM switchMore features for multi-access Configurations Single RMD Switch ConfigurationThroughout this manual, RMD-1150F-8 is Installation External Device ConnectionPC with PS/2 mouse Initial Power-Up Operation OSD On-Screen-Display Operation For KVM Switch IntroductionFunction key F1 Function key F2 Function key F3Function key F4 Auto ScanManual Scan Audio StickScan Type Scan RateKeyboard Speed Hotkey MenuHot-key commands 6 ESCPosition Left Ctrl + left Ctrl + F3 OSD On-Screen-Display Operation For LCD Monitor Key DefinitionLCD Power MenuBrightness OSD Exit for maintenance use XIICascaded Configuration GeneralChange Configuration while Running OperationFor system check by OSD Cleaning the Monitor DisclaimerTroubleshooting Symtoms Possible causes Solutions Symtoms Possible causes Solutions Condition Checkpoint Resolution Compatible modesResolution Modes Mode Resolution Freq.KHz Freq.HzLimited Warranty Page TechNote