•Position
The position of the selected computer name and/or OSD status displayed on screen during operation. The actual display position shifts due to different VGA resolution, the higher the resolution the higher the display position. The non-volatile memory stores the Position setting.UL as Upper Left, UR as Upper Right,LL as Lower Left, LR as Lower Right. MI as MIddle.
1.5.6 ESC
To exit the OSD, press the <ESCAPE> key.
1.5.7 Hot-key commands
The Hot-key command is a short keyboard sequence to select a computer, to activate computer scan, etc. The RMD switch interprets keystrokes for hot-keys all the time. A hot-key sequence starts with two left <CTRL> keystrokes followed by one or two more keystrokes. A built-in buzzer generates a high-pitch beep for correct hot-key command; otherwise, one low-pitch beep for error and the bad key sequence will not be forwarded to the selected computer.
The short form hot-key menu can be turned on as an OSD function (<F4>:more\Hotkey Menu) every time the left <CTRL> key is pressed twice.
L-CTRL:is the <CTRL> key located at the left side of the keyboard.
1~8: are the number keys '1' ~ '8' at the upper row of the keyboard.
Note: Do not use the keypad at the right of the keyboard.
•To select a computer by hot-key command, you must know its channel address, which is determined by the RMD switch connection. For a computer connected to the RMD switch, its address is represented by the PC port label (1~8). For a computer connected to a Slave, two characters represent its address. The first character is the channel address of the RMD switch unit (1~8)