Two-Console 15.0" TFT LCD display Switch
The advanced multi-access RMD switch and RMD-1150F-8 enables you to control multiple computers from one or two locations respectively. There is no interface card or software to configure. Installation is as easy as connecting cables between the RMD switch and your computers. Operation is as simple as entering a hot-key command and navigating through the user- friendly on-screen menu. RMD-1150F-8 switches 8 IBM- compatible computers and up to 64 IBM-compatible computers that are cascaded. The RMD switch is independent of the computer operating system.
On-Screen Display (OSD) Menu
The RMD switch with built-in OSD control, you can name your computers, switch to a computer from a list, configure settings with easy-to-use menus, view the name of the selected computer on-screen with a programmable time interval. The OSD displays the system status throughout this operation.
Automatic Mouse Conversion
The RMD switch allows you to connect computers with PS/2 or serial mouse ports (using adapters) and control the computers from internal mouse pad or one PS/2 mouse. The RMD switch automatically identifies the mouse and switches to proper mouse protocol.
High Video Quality
RMD-1150F-8 offers two consoles to display and control the computer that you connected. External console support provides VGA resolution up to 1600 x 1200 @ 85 Hz without any degradation and built-in console support 15.0" LCD display at 1024 x 768 @ 75Hz. Advanced VGA circuit design guarantees smooth, flicker-free switching from one computer to the other at distances up to 100 ft (30 m)* at both Console and PC sides.
*Tested with high-quality UL2919-rated, low-loss and shielded cables
RMD-1150 Series User's Manual | 8 |