Advantech RMD-1150 user manual Xii, OSD Exit for maintenance use

Page 26

XII

EXIT

OSDTIMER:

Press "+" or "-" to adjust the OSD Showing time.

GAMMAON/OFF:

Press "+" or "-"to ON/OFF

RECALL:

Push adjust "+" or "-" to RECALL the default

SPEAKER:

Audio Volume(optional)

CHANNELSELECTION:

Press to "+" or "-" select the VGA, S-Video and Video mode

OSD EXIT: (for maintenance use)

Press "+" or "-" to execute

RMD-1150 Series User's Manual

2 6

Image 26

Contents Page Copyright notice Acknowledgements Technical support Advantech customer servicesMessage to the Customer Safety Instructions, disclaimer, and warranty Page Page Introduction Automatic Mouse Conversion Two-Console 15.0 TFT LCD display SwitchOn-Screen Display OSD Menu High Video QualityFeatures Extra Features for On screen display for KVM switchMore features for multi-access Configurations Single RMD Switch ConfigurationThroughout this manual, RMD-1150F-8 is Installation External Device ConnectionPC with PS/2 mouse Initial Power-Up Operation OSD On-Screen-Display Operation For KVM Switch IntroductionFunction key F1 Function key F2 Function key F3Manual Scan Function key F4Auto Scan Audio StickKeyboard Speed Scan TypeScan Rate Hotkey MenuPosition Hot-key commands6 ESC Left Ctrl + left Ctrl + F3 OSD On-Screen-Display Operation For LCD Monitor Key DefinitionLCD Power MenuBrightness OSD Exit for maintenance use XIICascaded Configuration GeneralFor system check by OSD Change Configuration while RunningOperation Cleaning the Monitor DisclaimerTroubleshooting Symtoms Possible causes Solutions Symtoms Possible causes Solutions Condition Checkpoint Resolution Compatible modesResolution Modes Mode Resolution Freq.KHz Freq.HzLimited Warranty Page TechNote