|
| SC3100 |
|
| Contents |
1.0 | SAFECOM Telemetry Communications System | 5 |
1.1 | SAFECOM Communications Paths | 5 |
1.2 | Overview of SAFECOM Radio Communicators | 6 |
1.3 | SC3100, Full Data Transfer, Radio Communicator | 7 |
1.4 | SAFECOM SC3100 Radio Communicator Specifications | 8 |
1.5 | Standard Radio Specifications | 8 |
1.5.1 | Receiver | 8 |
1.5.2 | Transmitter | 8 |
1.5.3 | Factory supplied Antenna | 8 |
1.6 | Notices | 8 |
1.6.1 | Copyright Notice | 8 |
1.6.2 | Trademarks | 8 |
1.6.3 | Notice | 8 |
1.6.4 | Federal Communications Commission (FCC) Statement | 9 |
1.6.5 | Federal Communications Commission (FCC) Notice To Users | 9 |
2.0 | Circuit Board | 11 |
2.1 | SC3100 Circuit Board Components | 11 |
2.2 | System Status LED Indications | 12 |
2.3 | Radio Status LED Indications | 13 |
3.0 | 15 | |
3.1 | SC3100 | 15 |
3.2 | SC3100 Wiring Requirements | 15 |
3.3 | DC Power Requirements of the SC3100 Radio Communicator | 15 |
3.4 | SC3100 Internal Battery | 15 |
3.4.1 | SC3100 Internal Battery Replacement | 15 |
3.4.2 | Replacing the SC3100 Battery | 15 |
3.5 | SC3100 Radio Communicator Location | 16 |
3.6 | Antenna Location | 16 |
3.7 | SC3100 Acceptable Antenna Types | 17 |
4.0 | Installation Procedures | 19 |
4.1 | SC3100 Radio Communicator | 19 |
4.2 | Antenna | 19 |
4.3 | Connecting Wires to the SC3100 | 20 |
4.3.1 | Dialer | 20 |
4.3.2 | R131X | 20 |
4.3.3 | Main Molex Connector | 20 |
5.0 | System Initialization | 21 |
5.1 | System Initialization Procedures | 21 |
5.2 | Establishing Communications with the Central Station SAFECOM SC9000 Computer | 24 |
5.3 | Manual Initialization of an SC3100 Radio Communicator | 25 |
6.0 | Programming Worksheet SC3100 Radio Communicator Account Setup | 27 |
7.0 | Limited Warranty | 29 |
| SC3100 Operation and Installation Guide |
|
|
| |
© 2004 Bosch Security Systems | Page 3 |