EtherHub 1500 System User’s Guide
To activate a selection press the keyboard character corresponding to the highlighted character on screen. Or, use the arrow keys to move to the selection and press [Enter].
Activate the EtherHub 1500 System Configuration Program from a local console or via modem connection as described below. This will open the communication dialog box shown in Figure 4.1.
From a local console -
Type “ EH15SCP” at the DOS prompt C:\>EH15SCP
From a remote modem connection -
∙When using a PCMCIA FAX/Modem, first add the following entry to your config.sys file: device=cardtalk.sys /A /Com3IRQ=4
∙If your PC has a PCMCIA Fax/Modem or
Figure 4.1 Communication Port Dialog Box
3.Using arrow keys, select the workstation’s communication port connected to the
Setup and Configuration |