EtherHub 1500 System User’s Guide
Parameter
IP Address
MAC Address
Subnet Mask
Default Gateway
Default NMS
IPX Frame Type
IPX Network Number
Changing System Configuration
Use the Configuration command from the System Menu to modify current values for the following parameters:
Description
IP address of the agent you’re managing. The EtherHub system may be run on SNMP protocol over UDP/IP transport protocol. In this environment, all systems on the Internet, such as network interconnection devices and Network Management Stations (e.g., the PC running AccView) are assigned an IP address.
Hardware address of
Subnet mask of the agent you’ve selected. This mask identifies the host address bits used for routing to specific subnets.
Default gateway used in passing trap messages from the EtherHub agent to the management station.
For internal use only.
For internal use only.
The selected format used on the LAN; i.e., this type is that used by the IPX network where the
Identifies the IPX network number for the connected slot.
Parameter
SNMP Community Names
Community Name
Access
Status
IP Trap Managers
IP Address
Community Name
Status
IPX Trap Managers
Net Number
Node ID
Community Name
Status
Assigning Trap Managers
Use the Trap Managers command from the System Menu to modify current values for the following parameters:
Description
The community strings authorized for trap management access. All community strings used for IP and IPX Trap Managers must be listed in this table.
A community entry authorized for trap management access.
Management access is restricted to
The status of the current entry can be set to VALID or INVALID.
IP management stations selected to receive trap messages from the system.
IP address of the management station.
The community string required for trap management access.
The status of the current entry can be set to VALID or INVALID.
IPX management stations selected to receive trap messages from the system.
Identifies the IPX network number for the connected slot.
MAC address of the authorized trap manager.
The community string required for trap management access.
The status of the current entry can be set to VALID or INVALID.
Setup and Configuration |