Sun Microsystems 6800/4810/4800/3800 manual Restoreconfig

restoreconfig

Restores the platform and domain configurations from a server.

Scope

platform shell

Syntax

restoreconfig [-y-n] -f url

restoreconfig -h

Options/Parameters

-hdisplays help for this command.

-ydoes not prompt for confirmation.

-ndoes not execute this command if confirmation is required.

-fspecifies a URL, which must use the ftp protocol.

url is the directory containing the data files. The URL must point to a directory and not a file. Examples are:

ftp://userid:password@hostname/path

ftp://hostname/path

Note –The hostname you enter can be the host name or the host name with a fully qualified domain name, such as schostname or schostname.eng.sun.com. You cannot use a partial domain name.

Description

Restores the platform and domain configurations from a server if a system controller board has failed and has been replaced. This is based on the two data files created by the dumpconfig command, schostanme.nvci and schostname.tod, at the specified URL, which must point to a directory and use the ftp protocol. This command prompts you for a new platform password.

Chapter 3 System Controller Alphabetical Command Reference 59