Note
board is the board name.
■source_board is the source board for the flash images.
■destination_board is the destination board for the flash images.
all updates the system controller, all system boards (CPU/Memory boards and I/O assemblies), and the system controller real time operating system (rtos).
system_boards are all CPU/Memory boards and I/O assemblies.
scapp updates the current system controller. Updating the system controller reboots the system controller and disconnects all the current connections. To update the other system controller, you must run the flashupdate command from the other system controller. Use showsc to determine which system controller you are currently using so you know the system controller you must go to next to update it.
rtos updates the real time operating system for the system controller. If you have a second System Controller board installed, when you update the real time operating system also update the rtos on the second System Controller board. To update the rtos on the second system controller, run the flashupdate command from the second System Controller board.
domainID (a, b, c, or d) upgrades all boards that are assigned to this domain.
Description
Updates the firmware on the system controller, CPU/Memory boards, and I/O assemblies. There is no firmware on Repeater boards. Boards must be powered on in order to be updated with flashupdate. If a board does not have power, the flashupdate command will do nothing and stop with an error message. Boards that are in a secure domain cannot be updated.
Caution
Chapter 3 System Controller Alphabetical Command Reference 39
