TABLE 2-4 Status Field of the showboards Command (Continued)
Test Status | Description |
|
|
Not Tested | The board has not been tested. |
Degraded | Certain components on the board have failed or are disabled. A |
| board is degraded when there are still usable parts on the board. |
- | The slot is empty or not applicable for this device. |
|
|
Domain Status
In the showplatform and showdomain commands, one of the fields in the command output is domain status. The main values of domain status are (TABLE
TABLE
Domain State | Description |
|
|
Powered Off | The domain is not active and the keyswitch is in the off position. |
Standby | The domain is not active and the keyswitch is in the standby |
| position. |
Running POST | The domain is active and is running POST |
Active | The domain is active. |
Active - OpenBoot | The domain is active and is running the OpenBoot PROM. |
PROM |
|
Active - Booting | The domain is active and is booting the Solaris operating |
| environment. |
Active - Solaris | The domain is active and is running the Solaris operating |
| environment. |
Active - Halted | The Solaris operating environment is halted in the domain. |
Active - Reset | The domain has had an XIR reset and had not be rebooted. |
Active - Panicking | The domain is active and is panicking. It is creating the core file. |
Active - Debugger | The domain is active and the debugger is presently running. |
Not Responding | The domain is not responding. |
Paused due to an error | The domain is paused due to a hardware error. |
|
|
Chapter 2 System Controller Syntax, Arguments, and Device Names 7
