showresetstate
Shows that state of CPUs after a reset or a RED MODE trap.
Scope
domain shell
Syntax
showresetstate [-w -s -v]
Options/Parameters
-wdisplays the contents of register windows. The first windows displayed in the output are the stack trace for the failing CPU. The windows that are not part of the stack trace follow in the same order.
-sdisplays the contents of the secondary save area. Normally, the command displays the contents of the primary save area that holds the registers from the time of the first failure. If more than one failure occurs on a CPU, the secondary save area holds the selected registers from the time of the last failure.
-vdisplays a summary of all available registers. Includes the registers available with:
■-sand -woptions
■Default display (no options)
Description
Prints a summary report of the contents of registers from the save areas of every CPU in the domain that has a valid saved state. By specifying certain options, the format and content of the printed report can be controlled.
With no options, the command displays the following registers:
■Register window (globals, outs, locals, ins) that was current at the time of the failure.
■CANSAVE, CANRESTORE, OTHERWIN, and other selected privileged registers.
■AFAR and AFSR.
■TICK and some related CPU-specific registers.
Chapter 3 System Controller Alphabetical Command Reference 113
