Sun Microsystems 6800/4810/4800/3800 manual Setupplatform

setupplatform

Configures the platform specific variables.

Scope

platform shell

Syntax

setupplatform [-p part]. . .

setupplatform -h

Options/Parameters

-hdisplays help for this command.

-ppart configures the specified part and has the following options:

■acls is ACLs (Access Control List)

- clears the boards from the ACL

+adds all boards to the ACL

-aboard adds a board

-dboard deletes a board

■loghost configures loghost and facility with the default of local0. The loghost is the IP address or host name of the syslog loghost. The host name you enter must be a complete host name (not a partial one ).

■network is the network settings.

■partition sets the partition mode.

■sc configures system controller behavior.

■snmp is SNMP configuration

Chapter 3 System Controller Alphabetical Command Reference 81