setdefaults
Sets the default configuration values.
Caution –This is a destructive command. Use with caution and care.
Scope
platform shell, domain shell
Syntax
setdefaults [-y-n] [-c][-p platform]
setdefaults -h
Options/Parameters—Platform Shell
-ydoes not prompt for confirmation. The option sets the defaults for the platform shell and each domain shell.
-ndoes not execute the command if confirmation is requested. -ckeeps Capacity on Demand (COD) licenses.
-hdisplays help for this command.
-pplatform resets the defaults for the platform only.
Options/Parameters—Domain Shell
-ydoes not prompt for confirmation.
-ndoes not execute the command if confirmation is requested.
-hdisplays help for this command.
Chapter 3 System Controller Alphabetical Command Reference 69
