Sun Microsystems 6800/4810/4800/3800 manual Break

break

Sends a Break signal to the domain console.

Scope

domain shell

Syntax

break [-y-n]

break -h

Options/Parameters

-hdisplays help for this command.

-yanswers yes to the warning message. Does not prompt for confirmation.

-nanswers no to the warning message. Does not execute this command if confirmation is requested.

Description

Sends a Break signal to the domain console. Resumes the domain console.

Note –This command pauses the Solaris operating environment.

When the Solaris operating environment is running in the domain, the usual effect of the break signal is to force entry into OpenBoot PROM or the debugger. The Solaris operating environment will ignore the break signal if the keyswitch is set

to secure.

See Also

resume, setkeyswitch, showkeyswitch

Chapter 3 System Controller Alphabetical Command Reference 19