Sun Microsystems 6800/4810/4800/3800 manual Showlogs

showlogs

Displays the system controller logged events stored in the system controller message buffer.

Scope

platform shell, domain shell

Syntax for the Platform Shell

showlogs [-d domain ID] [-v]

showlogs -h

Syntax for the Domain Shell

showlogs [-v]

showlogs -h

Options/Parameters

-hdisplays help for this command.

-ddomainID (platform shell only) specifies a domain (a, b, c, or d).

-vis verbose.

Description

Displays the messages that are stored in the message buffer. Each domain and the platform have separate and independent buffers. Once a buffer is filled, the old messages are overwritten. These are messages from the system controller (not the Solaris operating environment) that are logged to the consoles. This is a small buffer and it is cleared when you reboot the system controller or when it loses power.

There is a separate log for the platform and for each domain. If the loghost has been configured (the platform and each domain are configured separately—using setupplatform for the platform loghost and setupdomain for each domain

106 Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual • October 2001