Sun Microsystems 6800/4810/4800/3800 manual Showdomain

showdomain

Displays the configuration and status of the domain.

Scope

domain shell

Syntax

showdomain [-v] [-p part]. . .

showdomain -h

Options/Parameters

-vis verbose mode.

-ppart is a parameter for the information to display:

■acls shows the ACLs (Access Control List)

■bootparams shows boot parameter information

■loghosts shows the log hosts

■mac shows MAC addresses

■snmp shows SNMP configuration

■status shows domain status

-hdisplays help for this command.

Description

Displays the configuration and status of the domain. Some of the information is not configurable, such as the MAC address and hostID, or is configurable in the platform, such as the Access Control List (ACL), and SNMP enabled. This command without any arguments displays all the parameter values configured by the setupdomain command.

See Also

setupdomain, showdate, setupplatform, showplatform

Chapter 3 System Controller Alphabetical Command Reference 95