Sun Microsystems 6800/4810/4800/3800 manual Min Max, SchostnameSC setupplatform

TABLE 3-11setupplatform Parameter Values (Continued)

Parameter Description

min

max

Configure platform for single or dual partition mode

All System Controller board components are tested using few locations with few test patterns.

All System Controller board components are tested with all tests and test patterns.

The two options are single or dual. The default is single. For a description of single and dual partition mode, refer to the “Overview” chapter in the Sun Fire 6800/4810/4800/3800 Systems Platform Administration Manual.

See Also

password, setdate, setupdomain, showdate, showdomain, showplatform, and the section “Setting Up the Platform” in the “System Power On and Setup” chapter of the Sun Fire 6800/4810/4800/3800 Systems Platform Administration Manual. This chapter describes a step-by-step procedure on setting up the platform using setupplatform.

Example

CODE EXAMPLE 3-47 setupplatform Output

schostname:SC> setupplatform

Network Configuration

---------------------

Use DHCP or static network settings? [DHCP]: Network settings? [static]:

Hostname []: IP Address []: Netmask []: Gateway []: DNS Domain []: Primary DNS Server []: Secondary DNS Server []:

Loghosts

--------

Loghost [ ]:

Log Facility [local0]:

84 Sun Fire 6800/4810/4800/3800 System Controller Command Reference Manual • October 2001